| ROBERT BOSCH GMBH | D8015 |
| FENWICK LINDE SARL | F1600 |
| FENWICK LINDE SARL | F1600 |
| NIMIKKEISTOKESKUS NCB FINLAND | A486G |
| MASSEY-FERGUSON INC NORTH AMERICAN PARTS OPN DIV | 1272 |
| WESTERBEKE CORPORATION | 3798 |
| HYSTER-YALE GROUP, INC. | 30076 |
| GENUINE PARTS COMPANY | 0HYJ6 |
| HYSTER-YALE GROUP, INC. | 4627 |
| HYSTER-YALE GROUP, INC. | 30076 |
| PERKINS ENGINES INC | 13446 |
| WIX CORP | 79396 |
| RENAULT TRUCKS DEFENSE | F6573 |
| ATELIER CONSTRUCTION MECANIQATLANTIQUE | F3931 |
| MAHLE FILTERSYSTEME GMBH | D1560 |
| MAHLE AFTERMARKET FRANCE SAS | F9924 |
| MAHLE AFTERMARKET FRANCE SAS | F9924 |
| MAHLE AFTERMARKET FRANCE SAS | F9924 |
| GENERAL MOTORS LLC | 7X677 |
| HONEYWELL INTERNATIONAL INC DBA HONEYWELL DIV CONSUMER PRODUCTS GROUP | 73370 |
| BODY DIAMETER | 3.875 INCHES NOMINAL |
| FILTRATION RATING IN MICRONS | 10.0 NOMINAL |
| FLOW DIRECTION | OUTSIDE IN |
| DROP PRESSURE | NOT RATED |
| DIFFERENTIAL PRESSURE | NOT RATED |
| DESIGN TYPE | NONREUSABLE |
| TEMP RATING | NOT RATED |
| BODY OVERALL LENGTH | 5.750 INCHES NOMINAL |
| FEATURES PROVIDED | ANTIDRAIN BACK DEVICE |
| NOMINAL THREAD SIZE | 0.750 INCHES |
| FILTERING MEDIA DESIGN | PLEATED SINGLE FILTERING MEDIA RESPONSE |
| FILTERING SYSTEM FOR WHICH DESIGNED | FULL FLOW |
| MATERIAL | ANY ACCEPTABLE FILTERING MEDIUM |
| MATERIAL DOCUMENT AND CLASSIFICATION | L-P-410 FED SPEC SINGLE MATERIAL RESPONSE GROMMET |
| MEDIA FOR WHICH DESIGNED | FUEL/OIL, HYDROCARBON |
| PROPRIETARY CHARACTERISTICS | PACS |
| STYLE DESIGNATOR | A14 CYLINDRICAL W/INTEGRAL OUTER CASING |
| THREAD SERIES DESIGNATOR | UNF |
| A replaceable device designed to remove solid particles from fluids ranging in density from heavy liquids to gases. The removal of particles is accomplished by porous material (metallic or non-metallic), stacked disks, wound wire, or the like, constructed so the fluid can flow through the device while the solid particles are retained. It may be designed to fit into a FILTER, FLUID (or similar cavity), or it may have an integral outer casing and mounting facilities and be designed to connect directly to an engine, compressor, or the like. The degree of removal of particles must be nominally rated at less than 5 microns or absolutely rated at less than 75 microns. Excludes FILTER ELEMENT, AIR CONDITIONING. See also STRAINER ELEMENT, SEDIMENT. |
