| BOEING COMPANY, THE | 94756 |
| AMPEX DATA SYSTEMS CORPORATION | 0PN68 |
| CRL COMPONENTS INC | 71590 |
| NIMIKKEISTOKESKUS NCB FINLAND | A486G |
| E.C.A ETABLISSEMENT CENTRALD'APPROVISIONNEMENT DES FORCES ARMEE | SCY13 |
| RCD COMPONENTS, INC. | 56637 |
| PICATINNY ARSENAL | 19203 |
| PICATINNY ARSENAL | 19203 |
| STRUTHERS-DUNN LLC | 213 |
| MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M | 81349 |
| MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M | 81349 |
| MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M | 81349 |
| VISHAY DALE ELECTRONICS LLC | 9969 |
| VISHAY DALE ELECTRONICS, LLC | 91637 |
| VISHAY DALE ELECTRONICS, LLC | 91637 |
| VISHAY DALE ELECTRONICS, LLC | 91637 |
| VISHAY DALE ELECTRONICS, LLC | 91637 |
| VISHAY DALE ELECTRONICS, LLC | 91637 |
| VISHAY DALE ELECTRONICS, LLC | 91637 |
| VISHAY DALE ELECTRONICS, LLC | 91637 |
| TEMP COEFFICIENT OF RESISTANCE IN PPM PER DEG CELSIUS | -1 |
| III ELECTRICAL RESISTANCE | 100.000 OHMS |
| RESISTANCE TOLERANCE IN PERCENT | -1.000 TO 1.000 |
| AMBIENT TEMP IN DEG CELSIUS AT FULL RATED POWER | 25 |
| AMBIENT TEMP IN DEG CELSIUS AT ZERO PERCENT RATED POWER | 275 |
| TEMP RANGE OF TEMP COEFFICIENT IN DEG CELSIUS | -55.0 TO 275.0 |
| INCLOSURE METHOD | ENCASED |
| TERMINAL TYPE | TAB, SOLDER LUG |
| RELIABILITY INDICATOR | ESTABLISHED |
| RELIABILITY FAILURE RATE LEVEL IN PERCENT | 0.01 |
| TERMINAL LENGTH | 0.438 INCHES NOMINAL |
| BODY LENGTH | 1.876 INCHES MINIMUM AND 2.000 INCHES MAXIMUM |
| BODY WIDTH | 0.532 INCHES MINIMUM AND 0.656 INCHES MAXIMUM |
| BODY HEIGHT | 0.594 INCHES MINIMUM AND 0.656 INCHES MAXIMUM |
| DISTANCE BETWEEN CENTERLINES OF MOUNTING FACILITIES PARALLEL TO BODY LENGTH | 1.562 INCHES NOMINAL |
| POWER DISSIPATION RATING IN WATTS | 10.000 FREE AIR |
| MOUNTING HOLE SIZE | 0.125 INCHES NOMINAL |
| CUBIC MEASURE | 0.719 CUBIC INCHES |
| III UNPACKAGED UNIT WEIGHT | 32.0 GRAMS |
| STYLE DESIGNATOR | AXIAL TERMINAL (S) |
| TEST DATA DOCUMENT | 81349-MIL-R-39009 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). |
| SPECIFICATION/STANDARD DATA | 81349-MIL-R-39009/1 GOVERNMENT SPECIFICATION |
| FSC APPLICATION DATA | TEST SETS ELECTRONIC SYSTEMS,EXCEPT SPECIALLY DESIGNED |
| INC 374 3 REINSTATED ON 1 3 3~A resistor whose ohmic value cannot be adjusted or varied. The resistance element consists of high resistance wire (or ribbon) either wound on an insulated form or constructed so as to be self-supporting. The item must have inherent characteristics of inducing self-inductance. Opposition to current flow is an inherent property of the resistance wire and is manifested by the heat dissipation in the resistor. Excludes SUPPRESSOR, IGNITION INTERFERENCE. See also RESISTOR (1), FIXED, WIRE WOUND, NONINDUCTIVE. |
8005-71117C
$0.00