| NORTHROP GRUMMAN SYSTEMS CORPORATION | 26916 |
| HONEYWELL INTERNATIONAL INC. | 70210 |
| HARVARD INDUSTRIES INC | 72962 |
| ZF INDUSTRIEANTRIEBE WITTEN GMBH | D9182 |
| ZF INDUSTRIEANTRIEBE WITTEN GMBH | D9182 |
| NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC NOT FOR RFQ OR SOLICITATION USE | 80205 |
| MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M | 96906 |
| THREAD CLASS | 3B |
| THREAD DIRECTION | RIGHT-HAND |
| LOCKING FEATURE | PREVAILING TORQUE WITH NONMETALLIC INSERT |
| LUBRICATION | SOLUBLE LUBRICANT |
| NUT STYLE | HEXAGON |
| NUT HEIGHT | 0.318 INCHES MINIMUM AND 0.469 INCHES MAXIMUM |
| END ITEM IDENTIFICATION | RG-33 AUV MRAP |
| WIDTH ACROSS FLATS | 0.553 INCHES MINIMUM AND 0.564 INCHES MAXIMUM |
| TEMP RATING | 250.0 DEG FAHRENHEIT NOMINAL |
| THREAD SERIES | UNJF |
| THREAD QUANTITY PER INCH | 24 |
| NOMINAL THREAD SIZE | 0.375 INCHES |
| COUNTERSINK ANGLE | 88.0 DEGREES NOMINAL NUT |
| BEARING SURFACE TYPE | CHAMFERED OR WASHER FACED |
| BEARING SURFACE FINISH | 125.0 MICROINCHES |
| SPECIAL FEATURES | . |
| MATERIAL | STEEL COMP 302 OR STEEL COMP 303 OR STEEL COMP 304 NUT |
| MATERIAL DOCUMENT AND CLASSIFICATION | AMS 5688 ASSN STD 1ST MATERIAL RESPONSE OR AMS 5630 ASSN STD 2ND MATERIAL RESPONSE OR AMS 5647 ASSN STD 3RD MATERIAL RESPONSE NUT |
| SURFACE TREATMENT | PASSIVATE OVERALL EXCEPT INSERT |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL EXCEPT INSERT |
| A nut having a flat bottom and 6 sides. An integral feature is incorporated for locking on the threads of a mating member. Excludes NUT (1), SELF-LOCKING, CAP. |
7398614-007
$0.00
2007-007
$0.00
22637-007
$0.00
350-007
$0.00