Part Number: 002-004048-006

(No reviews yet) Write a Review
CONDITION:
NS
NORTHROP GRUMMAN SYSTEMS CORPORATION26916
ZF INDUSTRIEANTRIEBE WITTEN GMBHD9182
NAVAIR AND NAVSEA MANAGED ORIGINAL DESIGN ACTIVITY DWG NOT MATERIAL/PARTS SUPPLIER10001
ZF INDUSTRIEANTRIEBE WITTEN GMBHD9182
E.C.A ETABLISSEMENT CENTRALD'APPROVISIONNEMENT DES FORCES ARMEESCY13
FREUNDLICH SUPPLY COMPANY, INC.8K112
ZF INDUSTRIEANTRIEBE WITTEN GMBHD9182
TRIMAN INDUSTRIES INC0ZBE8
NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC NOT FOR RFQ OR SOLICITATION USE80205
MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M96906
THREAD CLASS3B
THREAD DIRECTIONRIGHT-HAND
LOCKING FEATUREPREVAILING TORQUE WITH NONMETALLIC INSERT
LUBRICATIONSOLUBLE LUBRICANT
NUT STYLEHEXAGON
NUT HEIGHT0.266 INCHES MAXIMUM
WIDTH ACROSS FLATS0.492 INCHES MINIMUM AND 0.502 INCHES MAXIMUM
TEMP RATING250.0 DEG FAHRENHEIT MAXIMUM
THREAD SERIESUNJF
THREAD QUANTITY PER INCH24
NOMINAL THREAD SIZE0.312 INCHES
COUNTERSINK ANGLE88.0 DEGREES MINIMUM NUT
BEARING SURFACE TYPECHAMFERED OR WASHER FACED
BEARING SURFACE FINISH125.0 MICROINCHES
MATERIALPLASTIC POLYAMIDE LOCKING INSERT
MATERIALSTEEL CORROSION RESISTING NUT
SURFACE TREATMENTPASSIVATE OVERALL EXCEPT INSERT
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL EXCEPT INSERT
THREAD CLASS3B
THREAD DIRECTIONRIGHT-HAND
LOCKING FEATUREPREVAILING TORQUE WITH NONMETALLIC INSERT
LUBRICATIONSOLUBLE LUBRICANT
NUT STYLEHEXAGON
NUT HEIGHT0.266 INCHES MAXIMUM
WIDTH ACROSS FLATS0.492 INCHES MINIMUM AND 0.502 INCHES MAXIMUM
TEMP RATING250.0 DEG FAHRENHEIT MAXIMUM
THREAD SERIESUNJF
THREAD QUANTITY PER INCH24
NOMINAL THREAD SIZE0.312 INCHES
COUNTERSINK ANGLE88.0 DEGREES MINIMUM NUT
BEARING SURFACE TYPECHAMFERED OR WASHER FACED
BEARING SURFACE FINISH125.0 MICROINCHES
MATERIALPLASTIC POLYAMIDE LOCKING INSERT
MATERIALSTEEL CORROSION RESISTING NUT
SURFACE TREATMENTPASSIVATE OVERALL EXCEPT INSERT
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL EXCEPT INSERT
A nut having a flat bottom and 6 sides. An integral feature is incorporated for locking on the threads of a mating member. Excludes NUT (1), SELF-LOCKING, CAP.