Part Number: 003-007861-063

(No reviews yet) Write a Review
CONDITION:
NS
NORTHROP GRUMMAN SYSTEMS CORPORATION26916
BOEING COMPANY, THE94756
FEDERAL SCREW PRODUCTS INC.73734
ZF INDUSTRIEANTRIEBE WITTEN GMBHD9182
NORTHROP GRUMMAN SYSTEMS CORPORATION95542
GOULD INSTRUMENT SYSTEMS INC96795
GOULD INSTRUMENT SYSTEMS INC96795
ROCKWELL COLLINS, INC.13499
ROCKWELL COLLINS, INC.95105
RAYTHEON COMPANY96214
E.C.A ETABLISSEMENT CENTRALD'APPROVISIONNEMENT DES FORCES ARMEESCY13
LOCKHEED MARTIN CORP LOCKHEED MARTIN INFORMATION SYSTEMS AUTOMATED SPARES49671
MCMASTER-CARR SUPPLY COMPANY39428
ALLMETAL SCREW PRODUCTS CORP.70318
DIAMOND REO TRUCK CO56442
FEDERAL SPECIFICATIONS PROMULGATED BY GENERAL SERVICES ADMINISTRATION WASHINGTON DC81348
NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC NOT FOR RFQ OR SOLICITATION USE80205
AMERICAN CARBONIC ENGINEERING CO96096
MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M96906
THREAD CLASS2A
THREAD DIRECTIONRIGHT-HAND
THREAD LENGTH0.313 INCHES MINIMUM AND 0.375 INCHES MAXIMUM
FASTENER LENGTH0.375 INCHES NOMINAL
HEAD STYLEFLAT COUNTERSUNK
HEAD DIAMETER0.340 INCHES MINIMUM AND 0.385 INCHES MAXIMUM
INTERNAL DRIVE STYLECROSS RECESS TYPE 1
NOMINAL THREAD DIAMETER0.190 INCHES
THREAD QUANTITY PER INCH32
MINIMUM TENSILE STRENGTH80000 POUNDS PER SQUARE INCH
COUNTERSINK ANGLE80.0 DEGREES MINIMUM AND 82.0 DEGREES MAXIMUM
SCREW MATERIALSTEEL COMP 302 OR STEEL COMP 303 OR STEEL COMP 304 OR STEEL COMP 305 OR STEEL COMP 316
SCREW MATERIAL DOCUMENT AND CLASSIFICATION66 FED STD ALL MATERIAL RESPONSES
SCREW SURFACE TREATMENTPASSIVATE
SCREW SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE
THREAD SERIES DESIGNATORUNF
An externally threaded fastener whose threaded portion is of one nominal diameter, No ( . 6 in./1.5 mm) or larger, designed to be held or driven with either a wrench or an inserted driver or both (excluding internal socket or internal multiple spline types), in sizes below No. 1 ( .19 in./5 mm). No. 1 and larger sizes must have a head designed for any type inserted driver (excluding internal socket or internal multiple spline types), but may also be designed for external wrenching. A locking feature may be incorporated in the design of the head or threads. Excludes BOLT, CLEVIS; BOLT, EXTERNALLY RELIEVED BODY; SCREW, EXTERNALLY RELIEVED BODY; and SCREW, ASSEMBLED WASHER. See also, SCREW, INSTRUMENT; BOLT, MACHINE; BOLT, INTERNAL WRENCHING; and SCREW, CAP SOCKET HEAD.