| NORTHROP GRUMMAN SYSTEMS CORPORATION | 26916 |
| WOODWARD, INC. | 31361 |
| NIMIKKEISTOKESKUS NCB FINLAND | A486G |
| BOEING COMPANY, THE | 94756 |
| NORTHROP GRUMMAN SYSTEMS CORPORATION | 78022 |
| RAYTHEON SYSTEMS LIMITED | K0268 |
| ROCKWELL COLLINS, INC. | 13499 |
| E.C.A ETABLISSEMENT CENTRALD'APPROVISIONNEMENT DES FORCES ARMEE | SCY13 |
| SEASTROM MANUFACTURING CO., INC. | 86928 |
| KOLLSMAN, INC. | 89944 |
| GENERAL MOTORS CORP AC ROCHESTER DIV | 70040 |
| NORTHROP GRUMMAN SYSTEMS CORPORATION | 6481 |
| ZF INDUSTRIEANTRIEBE WITTEN GMBH | D9182 |
| AERONAUTICAL STANDARDS GROUP DEPT OF NAVY AND AIR FORCE | 88044 |
| ZF INDUSTRIEANTRIEBE WITTEN GMBH | D9182 |
| MBDA UK LTD | K0967 |
| GENERAL MOTORS CORP AC ROCHESTER DIV | 70040 |
| GLOBE AEROSPACE INC | 3647 |
| KEARFOTT CORPORATION | 88818 |
| NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC NOT FOR RFQ OR SOLICITATION USE | 80205 |
| CROSS-SECTIONAL SHAPE STYLE | RECTANGULAR |
| HOLE DIAMETER | 0.095 INCHES MINIMUM AND 0.115 INCHES MAXIMUM |
| PERIPHERAL SHAPE STYLE | ROUND |
| CENTER HOLE SHAPE STYLE | ROUND |
| THICKNESS | 0.006 INCHES MINIMUM AND 0.026 INCHES MAXIMUM |
| OVERALL DIAMETER | 0.245 INCHES MINIMUM AND 0.270 INCHES MAXIMUM |
| MATERIAL | STEEL CORROSION RESISTING OVERALL OR STEEL COMP 321 OVERALL OR STEEL COMP 347 OVERALL OR STEEL COMP 348 OVERALL |
| MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-5059 MIL SPEC 1ST MATERIAL RESPONSE OVERALL AND MIL-S-6721 MIL SPEC 2ND MATERIAL RESPONSE OVERALL AND MIL-S-6721 MIL SPEC 3RD MATERIAL RESPONSE OVERALL AND MIL-S-6721 MIL SPEC 4TH MATERIAL RESPONSE OVERALL |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416,TY 2,CL 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL |
| THREAD SERIES DESIGNATOR | UNF |
| A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch ( .8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be . 6 inches ( .15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be . 16 inches ( .4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items. |
