| NORTHROP GRUMMAN SYSTEMS CORPORATION | 26916 |
| EMBRAER S.A. DBA EMBRAER | 001JK |
| EMBRAER EMPRESA BRASILEIRA DE AERONAUTICA SA | S4956 |
| HONEYWELL INTERNATIONAL INC. | 59364 |
| PIPER AIRCRAFT INC. | 77294 |
| ZF INDUSTRIEANTRIEBE WITTEN GMBH | D9182 |
| E.C.A ETABLISSEMENT CENTRALD'APPROVISIONNEMENT DES FORCES ARMEE | SCY13 |
| RAYTHEON COMPANY | 96214 |
| HONEYWELL INTERNATIONAL INC. | 99193 |
| U S ARMY TANK AUTOMOTIVE COMMAND AMSTA-IM-MM | 19207 |
| SUNDSTRAND CORP ELECTRIC POWER SYSTEMS DIV | 83843 |
| HAMILTON SUNDSTRAND CORPORATION | 99167 |
| PILATUS AIRCRAFT LTD | S4080 |
| AERONAUTICAL STANDARDS GROUP DEPT OF NAVY AND AIR FORCE | 88044 |
| AERONAUTICAL STANDARDS GROUP DEPT OF NAVY AND AIR FORCE | 88044 |
| ZF INDUSTRIEANTRIEBE WITTEN GMBH | D9182 |
| AIRBUS OPERATIONS | F6198 |
| ROSEMOUNT AEROSPACE LTD | U8539 |
| ROSEMOUNT INC DBA FISHER ROSEMOUNT SERVICE AND SUPPORT | 4274 |
| ROSEMOUNT INC DBA FISHER ROSEMOUNT SERVICE AND SUPPORT | 4274 |
| CROSS-SECTIONAL SHAPE STYLE | RECTANGULAR |
| HOLE DIAMETER | 0.115 INCHES MINIMUM AND 0.135 INCHES MAXIMUM |
| PERIPHERAL SHAPE STYLE | ROUND |
| CENTER HOLE SHAPE STYLE | ROUND |
| THICKNESS | 0.006 INCHES MINIMUM AND 0.026 INCHES MAXIMUM |
| OVERALL DIAMETER | 0.307 INCHES MINIMUM AND 0.332 INCHES MAXIMUM |
| MATERIAL | STEEL OVERALL |
| MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-7952 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL OR QQ-S-698 FED SPEC SINGLE MATERIAL RESPONSE OVERALL |
| SURFACE TREATMENT | CADMIUM OVERALL |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416,TY 2,CL 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL |
| NONDEFINITIVE SPEC/STD DATA | A TYPE AND 2 GRADE AND A CLASS |
| TERMINAL TYPE AND QUANTITY | 14 PIN ALL FUNCTIONS |
| A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch ( .8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be . 6 inches ( .15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be . 16 inches ( .4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items. |
