| NORTHROP GRUMMAN SYSTEMS CORPORATION | 26916 |
| NIMIKKEISTOKESKUS NCB FINLAND | A486G |
| ROHR, INC | 51563 |
| BOEING COMPANY, THE | 43999 |
| BENDIX CORP THE | 6840 |
| HONEYWELL INTERNATIONAL INC. | 6848 |
| ZF INDUSTRIEANTRIEBE WITTEN GMBH | D9182 |
| AERONAUTICAL STANDARDS GROUP DEPT OF NAVY AND AIR FORCE | 88044 |
| ZF INDUSTRIEANTRIEBE WITTEN GMBH | D9182 |
| ZF INDUSTRIEANTRIEBE WITTEN GMBH | D9182 |
| NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC NOT FOR RFQ OR SOLICITATION USE | 80205 |
| OGS INDUSTRIES, INC | 8A623 |
| SIKORSKY AIRCRAFT CORPORATION | 78286 |
| CROSS-SECTIONAL SHAPE STYLE | RECTANGULAR |
| HOLE DIAMETER | 0.755 INCHES MINIMUM AND 0.775 INCHES MAXIMUM |
| PERIPHERAL SHAPE STYLE | ROUND |
| CENTER HOLE SHAPE STYLE | ROUND |
| THICKNESS | 0.080 INCHES MINIMUM AND 0.100 INCHES MAXIMUM |
| OVERALL DIAMETER | 1.307 INCHES MINIMUM AND 1.332 INCHES MAXIMUM |
| III END ITEM IDENTIFICATION | MRAP BUFFALO MK2A2 |
| MATERIAL | STEEL CORROSION RESISTING OR STEEL COMP 321 OR STEEL COMP 347 OR STEEL COMP 348 OVERALL |
| MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-5059 MIL SPEC 1ST MATERIAL RESPONSE AND MIL-S-6721 MIL SPEC 2ND MATERIAL RESPONSE AND MIL-S-6721 MIL SPEC 3RD MATERIAL RESPONSE AND MIL-S-6721 MIL SPEC 4TH MATERIAL RESPONSE OVERALL |
| SPECIFICATION/STANDARD DATA | 43999-2W1 MANUFACTURERS STANDARD |
| A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch ( .8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be . 6 inches ( .15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be . 16 inches ( .4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items. |
