| NORTHROP GRUMMAN SYSTEMS CORPORATION | 26916 |
| NIMIKKEISTOKESKUS NCB FINLAND | A486G |
| BENDIX CORP THE | 6840 |
| HONEYWELL INTERNATIONAL INC. | 6848 |
| AERONAUTICAL STANDARDS GROUP DEPT OF NAVY AND AIR FORCE | 88044 |
| ZF INDUSTRIEANTRIEBE WITTEN GMBH | D9182 |
| NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC NOT FOR RFQ OR SOLICITATION USE | 80205 |
| CROSS-SECTIONAL SHAPE STYLE | RECTANGULAR |
| HOLE DIAMETER | 0.880 INCHES MINIMUM AND 0.900 INCHES MAXIMUM |
| PERIPHERAL SHAPE STYLE | ROUND |
| CENTER HOLE SHAPE STYLE | ROUND |
| THICKNESS | 0.080 INCHES MINIMUM AND 0.100 INCHES MAXIMUM |
| OVERALL DIAMETER | 1.495 INCHES MINIMUM AND 1.520 INCHES MAXIMUM |
| MATERIAL | STEEL CORROSION RESISTING OVERALL OR STEEL COMP 321 OVERALL OR STEEL COMP 347 OVERALL OR STEEL COMP 348 OVERALL |
| MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-5059 MIL SPEC 1ST MATERIAL RESPONSE OVERALL AND MIL-S-6721 MIL SPEC 2ND MATERIAL RESPONSE OVERALL AND MIL-S-6721 MIL SPEC 3RD MATERIAL RESPONSE OVERALL AND MIL-S-6721 MIL SPEC 4TH MATERIAL RESPONSE OVERALL |
| SPECIFICATION/STANDARD DATA | 43999-2W1 MANUFACTURERS STANDARD |
| A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch ( .8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be . 6 inches ( .15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be . 16 inches ( .4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items. |
