| EATON-AEROQUIP INC DIV FLUID CONNECTORS PRODUCTS | 1276 |
| DANA CORP WEATHERHEAD DIV | 79470 |
| LFE INSTRUMENTS A MARK IV CO | 80145 |
| LFE INSTRUMENTS A MARK IV CO | 80145 |
| CROSS-SECTIONAL SHAPE STYLE | ROUND |
| THREAD CLASS | 2B 1ST END |
| THREAD DIRECTION | RIGHT-HAND 1ST END |
| INSIDE DIAMETER | 0.375 INCHES NOMINAL |
| TEMP RATING | -40.0 DEG FAHRENHEIT AND 200.0 DEG FAHRENHEIT SINGLE RESPONSE |
| OUTSIDE DIAMETER | 0.625 INCHES NOMINAL |
| MINIMUM INSIDE BENDING RADIUS | 3.000 INCHES |
| EXTERIOR COLOR | BLACK |
| CONNECTION STYLE | SWIVEL NUT FLARE 1ST END |
| END CONNECTION DESIGN | STRAIGHT 1ST END |
| CONNECTION TYPE | THREADED INTERNAL TUBE 1ST END |
| BURST TEST PRESSURE | 1600.0 POUNDS PER SQUARE INCH |
| LAYER COMPOSITION AND LOCATION | 1ST LAYER MOLDED RUBBER, SYNTHETIC AND OUTER LAYER WRAPPED RUBBER, CHLOROPRENE |
| MAXIMUM OPERATING PRESSURE | 400.0 POUNDS PER SQUARE INCH |
| NOMINAL THREAD SIZE | 0.562 INCHES 1ST END |
| SEAT ANGLE | 37.0 DEGREES 1ST END |
| HYDROSTATIC TEST PRESSURE | 800.0 POUNDS PER SQUARE INCH |
| OUTER COVERING ENVIRONMENTAL PROTECTION | OIL RESISTANT AND WEATHERPROOF |
| VACUUM IN TORR | 254 |
| INSIDE SURFACE CONDITION | SMOOTH |
| MEASURING METHOD AND LENGTH | 19.125 INCHES NOMINAL OVERALL |
| THREAD SERIES DESIGNATOR | UNF 1ST END |
| THREAD SERIES DESIGNATOR | NPT |
| A length of nonmetallic hose with fittings on one or both ends. For items without fittings, see HOSE, NONMETALLIC. Excludes HOSE ASSEMBLY, AIR DUCT; and HOSE ASSEMBLY, AIR DUCT, AIR BREATHING. |
606/990689
$0.00
606-242528
$0.00
MS16555-606
$0.00
412118-606
$0.00
606/5340340
$0.00