Part Number: 01-1060

(No reviews yet) Write a Review
CONDITION:
NS
ZF INDUSTRIEANTRIEBE WITTEN GMBHD9182
ANACOMP, INC.5037
ZF INDUSTRIEANTRIEBE WITTEN GMBHD9182
ZF INDUSTRIEANTRIEBE WITTEN GMBHD9182
ELETTRONICA SPAA1997
DARE ELECTRONICS, INC.55901
RAYTHEON COMPANY49956
E.C.A ETABLISSEMENT CENTRALD'APPROVISIONNEMENT DES FORCES ARMEESCY13
E.C.A ETABLISSEMENT CENTRALD'APPROVISIONNEMENT DES FORCES ARMEESCY13
FINMECCANICA SPA - AIRBORNE & SPACESYSTEM DIVISIONA0810
ZF INDUSTRIEANTRIEBE WITTEN GMBHD9182
ZF INDUSTRIEANTRIEBE WITTEN GMBHD9182
ZF INDUSTRIEANTRIEBE WITTEN GMBHD9182
ZF INDUSTRIEANTRIEBE WITTEN GMBHD9182
NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC NOT FOR RFQ OR SOLICITATION USE80205
ZF INDUSTRIEANTRIEBE WITTEN GMBHD9182
ELETTRONICA SPAA1997
ELETTRONICA GMBHC3141
ZF INDUSTRIEANTRIEBE WITTEN GMBHD9182
BUCKEYE STAMPING COMPANY, THE21604
INSIDE DIAMETER0.127 INCHES MINIMUM AND 0.129 INCHES MAXIMUM
COUNTERBORE DIAMETER0.300 INCHES MINIMUM
COUNTERBORE DEPTH0.177 INCHES MINIMUM
SETSCREW HOLE QUANTITY2
DISTANCE FROM HOLE CENTER TO KNOB/SKIRT BASE0.325 INCHES MAXIMUM
OVERALL DEPTH0.560 INCHES MINIMUM
GRIPPING SURFACE CONDITIONGRIP AID
SHAFT ACCOMMODATION STYLECOUNTERBORED
OUTSIDE DIAMETER0.490 INCHES MINIMUM AND 0.530 INCHES MAXIMUM
SKIRT STYLESTEPPED
REFERENCE MARKINGDOT
ATTACHMENT METHODSETSCREWS
OVERALL THICKNESS0.625 INCHES MINIMUM AND 0.685 INCHES MAXIMUM
MATERIAL TRANSPARENCYCLEAR
SCREW DRIVE TYPEHEXAGON SOCKET
THREAD QUANTITY PER INCH40 SCREW HOLE
NOMINAL THREAD SIZE0.112 INCHES SCREW HOLE
SKIRT OUTSIDE DIAMETER0.460 INCHES MAXIMUM
SKIRT DESIGNNONDETACHABLE
STYLE DESIGNATORROUND
THREAD SERIES DESIGNATORUNC SCREW HOLE
SURFACE LUSTERLUSTERLESS
SURFACE TREATMENTANODIZE
SURFACE TREATMENTPASSIVATE
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-P-416,TY 2,CL 3 FED SPEC SINGLE TREATMENT RESPONSE
An item designed to transmit manual, rotary or linear motion to other devices. May include detachable or nondetachable stud (shaft), pointer, or skirt. It may have reference markings in the form of dots, arrows, hairlines, and/or symbols which may be used in conjunction with a calibrated panel, vernier indicator, and the like to indicate the position or motion of items. For items having spokes or simulated spokes radiating from near the center to near the outside rim of the item and relatively thin round disk-shaped items 3 inches (76.2 mm) in diameter or over, see HANDWHEEL. For items calibrated in units or series of divisions to denote relative positioning of devices see DIAL, CONTROL. Excludes DOORKNOB; and HANDLE (as modified).