Part Number: 010062-640

(No reviews yet) Write a Review
CONDITION:
NS
BAE SYSTEMS INFORMATION AND ELECTRONIC SYSTEMS INTEGRATION I81413
NIMIKKEISTOKESKUS NCB FINLANDA486G
ZF INDUSTRIEANTRIEBE WITTEN GMBHD9182
HANSOME ENERGY SYSTEMS, INC.51802
ELECTRIC BOAT CORP DBA ELECTRO DYNAMIC95402
NAVAL AIR WARFARE CENTER AIRCRAFT DIV2387
E.C.A ETABLISSEMENT CENTRALD'APPROVISIONNEMENT DES FORCES ARMEESCY13
MBDA UK LTDK0967
MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M96906
BREEZE-EASTERN LLC8484
FIRST END STYLECHAMFERED
SECOND END STYLERADIUS
PIN OVERALL LENGTH0.615 INCHES MINIMUM AND 0.635 INCHES MAXIMUM
PIN OVERALL DIAMETER0.1876 INCHES MINIMUM AND 0.1878 INCHES MAXIMUM
SECOND END CORNER RADIUS0.016 INCHES MINIMUM AND 0.047 INCHES MAXIMUM
FIRST END TAPER LENGTH0.154 INCHES NOMINAL
FEATURES PROVIDEDCASEHARDENED
SECOND END RELATIONSHIP WITH FIRST ENDNOT IDENTICAL
HARDNESS RATING36.0 ROCKWELL C MINIMUM OVERALL AND 40.0 ROCKWELL C MAXIMUM OVERALL
FIRST END TAPER ANGLE4.0 DEGREES MINIMUM AND 12.0 DEGREES MAXIMUM
SURFACE FINISH16.0 MICROINCHES OUTSIDE DIAMETER
SPECIAL FEATURESRADIUS END MAY BE CHAMFERED 25 DEG
MATERIALSTEEL COMP 410 OVERALL OR STEEL COMP 416 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION66 FED STD ALL MATERIAL RESPONSES OVERALL
SURFACE TREATMENTPASSIVATE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
THREAD SERIES DESIGNATORUNC
A headless, cylindrically-shaped item having a straight, smooth, solid body, with or without a drilled hole(s). It has an outside diameter equal to or less than its length. Its length must not exceed twelve inches (3 4 MM); for items whose length exceeds twelve inches (3 4 MM); see ROD, STRAIGHT, HEADLESS. It is used for aligning or transfer of torque and/or thrust, by fitting into corresponding holes of another item. See also PIN, STRAIGHT, THREADED.