Part Number: 026-00306

(No reviews yet) Write a Review
CONDITION:
NS
ZF INDUSTRIEANTRIEBE WITTEN GMBHD9182
FINMECCANICA SPAA0199
HUNTINGTON INGALLS INCORPORATED43689
HYDRO-AIRE, INC.81982
SOCIETY OF AUTOMOTIVE ENGINEERS INC81343
SOCIETY OF AUTOMOTIVE ENGINEERS INC81343
MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M96906
MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M96906
CROSS-SECTIONAL SHAPE STYLESQUARE
CROSS-SECTIONAL THICKNESS0.025 INCHES MINIMUM AND 0.029 INCHES MAXIMUM
CROSS-SECTIONAL HEIGHT0.075 INCHES MINIMUM AND 0.087 INCHES MAXIMUM
DISTANCE BETWEEN ENDS0.032 INCHES MINIMUM AND 0.062 INCHES MAXIMUM
CENTER HOLE DIAMETER0.219 INCHES NOMINAL
PERIPHERAL DIAMETER0.327 INCHES MINIMUM AND 0.331 INCHES MAXIMUM
JOINT TYPESCARF-BUTT RETAINER
ANGLE25.0 DEGREES MINIMUM AND 35.0 DEGREES MAXIMUM
MATERIALPLASTIC TETRAFLUOROETHYLENE OVERALL
MATERIAL DOCUMENT AND CLASSIFICATIONSAE-AS8791 NATIONAL SPEC SINGLE MATERIAL RESPONSE OVERALL
MATERIAL DOCUMENT AND CLASSIFICATIONMIL-R-8791 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
An item designed to fit over a packing gland by mating with a surface of a second part which together will retain into a narrow groove or confined space the PACKING, PREFORMED or O-RING, or an item designed to fit over a rod or shaft, to mate with a stuffing box to confine PACKING MATERIAL. It may function as a static or dynamic seal retainer with the packing located on, around, or in the centerline direction of the rod or shaft axis. It may have holes or joints for mounting, be threaded or unthreaded. See also PACKING NUT and PACKING NUT, STUFFING TUBE.