| COLTEC INDUSTRIES INC | 82796 |
| ZF INDUSTRIEANTRIEBE WITTEN GMBH | D9182 |
| CROSS-SECTIONAL SHAPE STYLE | RECTANGULAR |
| HOLE DIAMETER | 0.125 INCHES NOMINAL |
| PERIPHERAL SHAPE STYLE | ROUND |
| CENTER HOLE SHAPE STYLE | ROUND |
| THICKNESS | 0.030 INCHES NOMINAL |
| OVERALL DIAMETER | 0.375 INCHES NOMINAL |
| III END ITEM IDENTIFICATION | FUEL INJECTORS FOR FAIRBANKS MORSE 8 CYLINDER DIESEL ENGINES 38D8 1/8; ONBOARD 140 FT COAST GUARD VESSELS |
| MATERIAL | STEEL OVERALL |
| A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch ( .8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be . 6 inches ( .15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be . 16 inches ( .4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items. |
LF-790
$0.00
MS9202-015
$0.00
MS28775-015
$0.00
2316-015
$0.00