HEWLETT-PACKARD COMPANY | 28480 |
ZF INDUSTRIEANTRIEBE WITTEN GMBH | D9182 |
ROTOR CLIP COMPANY INC. | 7382 |
TRUARC CO LLC | 97464 |
ZF INDUSTRIEANTRIEBE WITTEN GMBH | D9182 |
ZF INDUSTRIEANTRIEBE WITTEN GMBH | D9182 |
E.C.A ETABLISSEMENT CENTRALD'APPROVISIONNEMENT DES FORCES ARMEE | SCY13 |
HAMILTON SUNDSTRAND CORPORATION | 73030 |
THE HYMATIC ENGINEERING COMPANYLIMITED T/A HONEYWELL HYMATIC | U1585 |
MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M | 81349 |
MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M | 96906 |
SEEGER INC ANDERTON-UNITED PRODUCTS DIV | 54963 |
TRUARC COMPANY LLC DBA WALDES TRUARC | 79136 |
ROTOR CLIP COMPANY INC. | 7382 |
TRUARC COMPANY LLC DBA WALDES TRUARC | 79136 |
ZF INDUSTRIEANTRIEBE WITTEN GMBH | D9182 |
ROTOR CLIP COMPANY INC. | 7382 |
TRUARC COMPANY LLC DBA WALDES TRUARC | 79136 |
GENERAL ELECTRIC CO MATERIALS INFORMATION SERVICES | 9172 |
NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC NOT FOR RFQ OR SOLICITATION USE | 80205 |
CROSS-SECTIONAL SHAPE STYLE | RECTANGULAR |
CASEHARDENING INDICATOR | NOT CASEHARDENED |
OUTSIDE DIAMETER | 0.041 INCHES MINIMUM AND 0.425 INCHES MAXIMUM |
MAJOR THICKNESS | 0.023 INCHES MINIMUM AND 0.027 INCHES MAXIMUM |
RING STYLE | INTERNAL |
USAGE DESIGN | INTERNAL |
MATERIAL HARDNESS RATING | 69.5 ROCKWELL SUPERFICIAL 30-N MINIMUM AND 73.0 ROCKWELL SUPERFICIAL 30-N MAXIMUM |
MATERIAL | STEEL,FED STD 66 AISI 1066 OR 1069 OR 1070 OR 1072 OR 1074 OR 1075 OR 1078 OR 1080 OR 1084 OR 1086 OR 1090 |
SURFACE TREATMENT | CADMIUM AND CHROMATE |
STYLE DESIGNATOR | G52 SPECIAL SHAPED |
A resilient metal item, circular or nearly circular, which is designed to be inserted into an internal or external groove and retained by its own spring action, or it may have external prongs or projections designed to be inserted into a hole and retained by spring action of the prongs which grip by imbedding into the material. For items having internal prongs which perform the same function, see PUSH ON NUT. It is used to keep and/or lock a part(s) in position, as a ball bearing on a shaft or in a housing. See also CLIP, RETAINING and PIN, LOCK. Excludes RING, CONNECTING, ROUND. |