Part Number: 0625NC-3500-2

(No reviews yet) Write a Review
CONDITION:
NS
ZF INDUSTRIEANTRIEBE WITTEN GMBHD9182
ANTENNA PRODUCTS CORPORATION6032
OSHKOSH CORPORATION45152
OSHKOSH DEFENSE, LLC75Q65
E.C.A ETABLISSEMENT CENTRALD'APPROVISIONNEMENT DES FORCES ARMEESCY13
E.C.A ETABLISSEMENT CENTRAL DESAPPROVISIONNEMENTS DES FORCES ARMEEA00AM
AM GENERAL LLC34623
AMERICAN NATIONAL STANDARDS INSTITUTE, INCORPORATED80204
ZF INDUSTRIEANTRIEBE WITTEN GMBHD9182
MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M96906
THREAD CLASS2A
THREAD DIRECTIONRIGHT-HAND
THREAD LENGTH1.500 INCHES MINIMUM AND 1.727 INCHES MAXIMUM
FASTENER LENGTH3.406 INCHES MINIMUM AND 3.500 INCHES MAXIMUM
HEAD STYLEHEXAGON
HEAD HEIGHT0.378 INCHES MINIMUM AND 0.403 INCHES MAXIMUM
WIDTH BETWEEN FLATS0.922 INCHES MINIMUM AND 0.938 INCHES MAXIMUM
END ITEM IDENTIFICATIONMRAP RG-33
NOMINAL THREAD DIAMETER0.625 INCHES
THREAD QUANTITY PER INCH11
MINIMUM TENSILE STRENGTH150000 POUNDS PER SQUARE INCH
HARDNESS RATING32.0 ROCKWELL C MINIMUM OVERALL AND 38.0 ROCKWELL C MAXIMUM OVERALL
SURFACE FINISH63.0 MICROINCHES THREADS
MATERIALSTEEL OVERALL
MATERIAL DOCUMENT AND CLASSIFICATIONSAE J429 GRADE 8 ASSN STD SINGLE MATERIAL RESPONSE OVERALL OR ASTM A354 GRADE BD ASSN STD SINGLE MATERIAL RESPONSE OVERALL
SURFACE TREATMENTZINC OVERALL AND CHROMATE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONASTM B633 TY 2 SC 3 ASSN STD SINGLE TREATMENT RESPONSE OVERALL
THREAD SERIES DESIGNATORUNC
NONDEFINITIVE SPEC/STD DATA2 TYPE AND 10P STYLE AND 5 GRADE
An externally threaded fastener designed for insertion into holes in assembled parts, for mating with a preformed internal thread and for tightening or releasing by torquing the head. The threaded and unthreaded portions are both of the same nominal diameter of .19 inch (5 mm) or larger. Head dimensions and sizes of threaded and unthreaded portions shall conform to internationally recognized fastener standards. The thread length being the controlled dimension, the grip length is not specified. A locking feature may be incorporated in the design of the head or threads. Excludes BOLT, MACHINE; BOLT, EXTERNALLY RELIEVED BODY; BOLT, INTERNAL WRENCHING; and SCREW, CAP, SOCKET HEAD.