Part Number: 0757-0274

(No reviews yet) Write a Review
CONDITION:
NS
HEWLETT-PACKARD COMPANY28480
GOULD INSTRUMENT SYSTEMS INC96795
NORTHROP GRUMMAN SYSTEMS CORPORATION4804
GTE COMMUNICATION SYSTEMS CORP4773
BACHARACH, INC.5083
BACHARACH, INC.5083
AEROFLEX WICHITA, INC.51190
TEKTRONIX, INC.80009
RAYTHEON COMPANY96214
HAMILTON SUNDSTRAND CORPORATION73030
NEXTIRAONE SOLUTIONS LLC6602
ROCKWELL COLLINS, INC.13499
VISHAY DALE ELECTRONICS, LLC91637
TRW INC TRW IRC FIXED RESISTORS/BURLINGTON7716
MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M81349
DOW CORNING CORPORATION71984
MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M81349
MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M81349
MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M81349
MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M81349
TEMP COEFFICIENT OF RESISTANCE IN PPM PER DEG CELSIUS-1
ELECTRICAL RESISTANCE1.210 KILOHMS
RESISTANCE TOLERANCE IN PERCENT-1
AMBIENT TEMP IN DEG CELSIUS AT FULL RATED POWER125
AMBIENT TEMP IN DEG CELSIUS AT ZERO PERCENT RATED POWER175
TEMP RANGE OF TEMP COEFFICIENT IN DEG CELSIUS-0.314285714285714
INCLOSURE METHODENCAPSULATED
TERMINAL TYPEWIRE LEAD
RELIABILITY INDICATORESTABLISHED
RELIABILITY FAILURE RATE LEVEL IN PERCENT0.001
BODY DIAMETER0.125 INCHES NOMINAL
BODY LENGTH0.375 INCHES NOMINAL
POWER DISSIPATION RATING IN WATTS0.125 FREE AIR
STYLE DESIGNATORAXIAL TERMINAL EACH END
TEST DATA DOCUMENT81349-MILR55182 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.).
A resistor whose ohmic value cannot be adjusted or varied. The resistance element consists of either a thin layer of conductive material, containing either binders or insulating materials, deposited on an insulated form; or an alloy of metal and ceramic materials, usually fused to an insulated form. Opposition to the flow of current is an inherent property of the materials used and is manifest by the heat dissipation in the resistor. See also ATTENUATOR, FIXED and RESISTOR, FIXED, COMPOSITION. Excludes carbon composition type resistors.