Part Number: 095-10600

(No reviews yet) Write a Review
CONDITION:
NS
PARKER-HANNIFIN CORPORATION33269
THERMO KING CORPORATION DBA PHOENIX GLOBAL DISTIRBUTION.61510
DEPARTMENT OF THE ARMY ARMY RESEARCH LABORATORY ADELPHI LABORATORY CENTER19202
PICATINNY ARSENAL19203
SUPERVISOR OF SHIPBUILDING CONVERSION AND REPAIR USN81898
NAVAL SHIP SYSTEMS COMMAND80064
ARMY, UNITED STATES DEPARTMENT OF THE19204
EMBRAER S.A. DBA EMBRAER001JK
EMBRAER AVIATION INTERNATIONALFB459
PIPER AIRCRAFT INC.77294
RAYTHEON COMPANY82577
SOCATAF0086
ARMY, UNITED STATES DEPARTMENT OF THE81337
ARMY WEAPONS COMMAND ATTN AMSWE-REE-S21450
U S ARMY TANK AUTOMOTIVE COMMAND AMSTA-IM-MM19207
US ARMY ARDEC RDECOM19200
U S ARMY TANK AUTOMOTIVE COMMAND AMSTA-IM-MM19207
U S ARMY AVIATION AND MISSILE COMMAND18876
PICATINNY ARSENAL19203
ARMY WEAPONS COMMAND ATTN AMSWE-REE-S21450
CROSS-SECTIONAL SHAPE STYLERECTANGULAR
HOLE DIAMETER0.380 INCHES MINIMUM AND 0.400 INCHES MAXIMUM
PERIPHERAL SHAPE STYLEROUND
CENTER HOLE SHAPE STYLEROUND
THICKNESS0.053 INCHES MINIMUM AND 0.073 INCHES MAXIMUM
OVERALL DIAMETER0.620 INCHES MINIMUM AND 0.645 INCHES MAXIMUM
MATERIALSTEEL OVERALL
MATERIAL DOCUMENT AND CLASSIFICATIONMIL-S-7952 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL OR QQ-S-698 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
SURFACE TREATMENTCADMIUM OVERALL AND CHROMATE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-P-416,TY 2,CL 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
STYLE DESIGNATORB19C NON-CIRCULAR
THREAD SERIES DESIGNATORNPT 2ND END
THREAD SERIES DESIGNATORUNC STUD THREAD
NONDEFINITIVE SPEC/STD DATAA TYPE
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch ( .8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be . 6 inches ( .15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be . 16 inches ( .4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.