Part Number: 100-048-8-10

(No reviews yet) Write a Review
CONDITION:
NS
BELL HELICOPTER TEXTRON INC.97499
FASTENER TECHNOLOGY CORP.58794
SPS TECHNOLOGIES, LLC6725
ARCONIC GLOBAL FASTENERS & RINGS, INC.6950
HUCK INTERNATIONAL, INC.17446
SPS TECHNOLOGIES, LLC56878
FASTENER TECHNOLOGY CORP.58794
ARCONIC GLOBAL FASTENERS & RINGS, INC.5M902
WEST COAST AEROSPACE INC60516
HI-SHEAR CORPORATION73197
ALCOA GLOBAL FASTENERS, INC.92215
HUCK INTL INC97928
LISI AEROSPACE CANADA CORP DIV HI SHEAR HOLDINGS INCL4528
SATAIR A/SR1120
MCDONNELL DOUGLAS HELICOPTER CO INC2731
BOEING COMPANY, THE8V613
PALL EUROPE LIMITED AEROSPACE DIVISIONK6539
PALL EUROPE LIMITED AEROSPACE DIVISIONK6539
THREAD CLASS3A
THREAD DIRECTIONRIGHT-HAND
FASTENER LENGTH1.010 INCHES MINIMUM AND 1.030 INCHES MAXIMUM
HEAD HEIGHT0.077 INCHES MINIMUM AND 0.090 INCHES MAXIMUM
WIDTH BETWEEN FLATS0.0947 INCHES MINIMUM AND 0.0967 INCHES MAXIMUM
SHANK DIAMETER0.2485 INCHES MINIMUM AND 0.2495 INCHES MAXIMUM
SHANK STYLEPIN-RIVET, STRAIGHT, THREADED
HEAD MAJOR DIAMETER0.415 INCHES MINIMUM AND 0.440 INCHES MAXIMUM
LUBRICATIONCETYL ALCOHOL
GRIP LENGTH0.630 INCHES MAXIMUM
THREAD QUANTITY PER INCH28
NOMINAL THREAD SIZE0.250 INCHES
SHEAR STRENGTH9300 DOUBLE POUNDS PER SQUARE INCH
MATERIALSTEEL COMP E4340 OVERALL OR STEEL COMP 4340 OVERALL OR STEEL COMP 4140 OVERALL OR STEEL COMP 8740 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATIONMIL-S-5000 MIL SPEC 1ST MATERIAL RESPONSE OVERALL OR MIL-S-5000 MIL SPEC 2ND MATERIAL RESPONSE OVERALL OR MIL-S-5626 MIL SPEC 3RD MATERIAL RESPONSE OVERALL OR MIL-S-6049 MIL SPEC 4TH MATERIAL RESPONSE OVERALL
SURFACE TREATMENTCADMIUM OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-P-416,TY 2,CL 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
THREAD SERIES DESIGNATORUNJF
HEAD STYLEA34 FLAT CHAMFER
A metallic or nonmetallic item, headed at one end, with a cylindrically shaped shank which may be tapered, grooved, or threaded. A locking collar or sleeve may be provided to perform the same holding action as the clinching portion of a conventional rivet. The shank may include an external wrenching facility which breaks off at a predetermined applied torque.