Part Number: 1000-005PC70

(No reviews yet) Write a Review
CONDITION:
NS
ALUF INDUSTRIES INC27423
SEARLE LEATHER AND PACKING CO91069
HOUGHTON INTL INC97451
NAVAL SEA SYSTEMS COMMAND53711
NAVAL SHIP SYSTEMS COMMAND80064
HISPANO SUIZA GROUPE SAFRANF0302
SAFRAN LANDING SYSTEMSF6137
ELECTRIC BOAT CORPORATION96169
MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M96906
MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M96906
CROSS-SECTIONAL SHAPE STYLESQUARE
CROSS-SECTIONAL THICKNESS0.046 INCHES MINIMUM AND 0.052 INCHES MAXIMUM
CROSS-SECTIONAL HEIGHT0.138 INCHES MINIMUM AND 0.156 INCHES MAXIMUM
DISTANCE BETWEEN ENDS0.188 INCHES MINIMUM AND 0.312 INCHES MAXIMUM
CENTER HOLE DIAMETER7.500 INCHES NOMINAL
PERIPHERAL DIAMETER7.974 INCHES MINIMUM AND 7.978 INCHES MAXIMUM
JOINT TYPESCARF-BUTT RETAINER
ANGLE25.0 DEGREES MINIMUM AND 35.0 DEGREES MAXIMUM
MATERIALPLASTIC POLYTETRAFLUOROETHYLENE OVERALL
MATERIAL DOCUMENT AND CLASSIFICATIONMIL-R-8791 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
An item designed to fit over a packing gland by mating with a surface of a second part which together will retain into a narrow groove or confined space the PACKING, PREFORMED or O-RING, or an item designed to fit over a rod or shaft, to mate with a stuffing box to confine PACKING MATERIAL. It may function as a static or dynamic seal retainer with the packing located on, around, or in the centerline direction of the rod or shaft axis. It may have holes or joints for mounting, be threaded or unthreaded. See also PACKING NUT and PACKING NUT, STUFFING TUBE.