Part Number: 100000-02-2-1

(No reviews yet) Write a Review
CONDITION:
NS
SYMBOLIC DISPLAYS, INC.19565
NIMIKKEISTOKESKUS NCB FINLANDA486G
SAFRANF6151
SAFRAN ELECTRONICS & DEFENSEFAQ15
MOOG INC.1K426
MOOG INC.99932
RAYTHEON COMPANY5869
ZF INDUSTRIEANTRIEBE WITTEN GMBHD9182
LOCKHEED MARTIN CORPORATION3640
NORTHROP GRUMMAN SYSTEMS CORPORATION6481
MBDA UK LTDK0967
NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC NOT FOR RFQ OR SOLICITATION USE80205
THREAD CLASS2A
THREAD DIRECTIONRIGHT-HAND
THREAD LENGTH0.152 INCHES MINIMUM AND 0.188 INCHES MAXIMUM
FASTENER LENGTH0.156 INCHES MINIMUM AND 0.188 INCHES MAXIMUM
HEAD STYLEFLAT COUNTERSUNK
HEAD DIAMETER0.156 INCHES MINIMUM AND 0.172 INCHES MAXIMUM
INTERNAL DRIVE STYLECROSS RECESS TYPE 1
NOMINAL THREAD DIAMETER0.086 INCHES
THREAD QUANTITY PER INCH56
MINIMUM TENSILE STRENGTH80000 POUNDS PER SQUARE INCH
COUNTERSINK ANGLE99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM
SCREW MATERIALSTEEL COMP 302 OR STEEL COMP 303 OR STEEL COMP 321 OR STEEL COMP 347
SCREW SURFACE TREATMENTPASSIVATE
SCREW SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE
THREAD SERIES DESIGNATORUNC
An externally threaded fastener whose threaded portion is of one nominal diameter, No ( . 6 in./1.5 mm) or larger, designed to be held or driven with either a wrench or an inserted driver or both (excluding internal socket or internal multiple spline types), in sizes below No. 1 ( .19 in./5 mm). No. 1 and larger sizes must have a head designed for any type inserted driver (excluding internal socket or internal multiple spline types), but may also be designed for external wrenching. A locking feature may be incorporated in the design of the head or threads. Excludes BOLT, CLEVIS; BOLT, EXTERNALLY RELIEVED BODY; SCREW, EXTERNALLY RELIEVED BODY; and SCREW, ASSEMBLED WASHER. See also, SCREW, INSTRUMENT; BOLT, MACHINE; BOLT, INTERNAL WRENCHING; and SCREW, CAP SOCKET HEAD.