Part Number: 10114393

(No reviews yet) Write a Review
CONDITION:
NS
NIMIKKEISTOKESKUS NCB FINLANDA486G
NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC NOT FOR RFQ OR SOLICITATION USE80205
THREAD CLASS3A
THREAD DIRECTIONRIGHT-HAND
THREAD LENGTH0.544 INCHES MINIMUM
FASTENER LENGTH0.794 INCHES NOMINAL
HEAD STYLEHEXAGON
HEAD HEIGHT0.156 INCHES NOMINAL
WIDTH BETWEEN FLATS0.430 INCHES MINIMUM AND 0.439 INCHES MAXIMUM
NOMINAL THREAD DIAMETER0.250 INCHES
GRIP LENGTH0.250 INCHES NOMINAL
FEATURES PROVIDEDFINISHED HEAD
THREAD QUANTITY PER INCH28
MINIMUM TENSILE STRENGTH140000 POUNDS PER SQUARE INCH
SPECIAL FEATURESTENSILE STRENGTH AT ROOM TEMPERATURE
MATERIALIRON ALLOY 660 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATIONAMS5731 ASSN STD SINGLE MATERIAL RESPONSE OVERALL OR AMS5732 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
SURFACE TREATMENTPASSIVATE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONMIL-S-5002 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL
THREAD SERIES DESIGNATORUNF
THREAD CLASS3A
THREAD DIRECTIONRIGHT-HAND
THREAD LENGTH0.544 INCHES MINIMUM
FASTENER LENGTH0.794 INCHES NOMINAL
HEAD STYLEHEXAGON
HEAD HEIGHT0.156 INCHES NOMINAL
WIDTH BETWEEN FLATS0.430 INCHES MINIMUM AND 0.439 INCHES MAXIMUM
NOMINAL THREAD DIAMETER0.250 INCHES
GRIP LENGTH0.250 INCHES NOMINAL
FEATURES PROVIDEDFINISHED HEAD
THREAD QUANTITY PER INCH28
MINIMUM TENSILE STRENGTH140000 POUNDS PER SQUARE INCH
SPECIAL FEATURESTENSILE STRENGTH AT ROOM TEMPERATURE
MATERIALIRON ALLOY 660 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATIONAMS5731 ASSN STD SINGLE MATERIAL RESPONSE OVERALL OR AMS5732 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
SURFACE TREATMENTPASSIVATE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONMIL-S-5002 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL
THREAD SERIES DESIGNATORUNF
An externally threaded fastener designed for insertion through holes in assembled parts and normally intended to be tightened or released by torquing a nut. The threaded and unthreaded portions are both of one nominal diameter of .19 inch (5 mm) or larger. The head is not designed to be held or driven with an inserted driver or by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads. Head dimensions and sizes of threaded and unthreaded portions shall conform to internationally recognized fastener standards. For items having a grip length portion machined to a tolerance of . 15 inch ( . 38 mm) or less, BOLT, SHEAR. See also SCREW, CAP, HEXAGON HEAD and SCREW, MACHINE.