| NIMIKKEISTOKESKUS NCB FINLAND | A486G |
| BOEING COMPANY, THE | 43999 |
| NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC NOT FOR RFQ OR SOLICITATION USE | 80205 |
| THREAD CLASS | 3A |
| THREAD DIRECTION | RIGHT-HAND |
| THREAD LENGTH | 0.276 INCHES MINIMUM |
| FASTENER LENGTH | 0.449 INCHES MINIMUM AND 0.479 INCHES MAXIMUM |
| HEAD STYLE | FLAT COUNTERSUNK |
| HEAD DIAMETER | 0.328 INCHES MINIMUM AND 0.385 INCHES MAXIMUM |
| GRIP DIAMETER | 0.1885 INCHES MINIMUM AND 0.1895 INCHES MAXIMUM |
| INTERNAL DRIVE STYLE | OFFSET CRUCIFORM (TORQUE SET) |
| NOMINAL THREAD DIAMETER | 0.1900 INCHES |
| GRIP LENGTH | 0.188 INCHES NOMINAL |
| THREAD QUANTITY PER INCH | 32 |
| MINIMUM TENSILE STRENGTH | 160000 POUNDS PER SQUARE INCH |
| HARDNESS RATING | 36.0 ROCKWELL C MINIMUM OVERALL AND 40.0 ROCKWELL C MAXIMUM OVERALL |
| COUNTERSINK ANGLE | 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM |
| SURFACE FINISH | 32.0 MICROINCHES GRIP |
| SURFACE FINISH | 32.0 MICROINCHES THREADS |
| MATERIAL | STEEL COMP 4140 OVERALL OR STEEL COMP E4340 OVERALL OR STEEL COMP 6150 OVERALL OR STEEL COMP 8735 OVERALL OR STEEL COMP 8740 OVERALL |
| MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-5626 MIL SPEC 1ST MATERIAL RESPONSE OVERALL OR MIL-S-5000 MIL SPEC 2ND MATERIAL RESPONSE OVERALL OR MIL-S-8503 MIL SPEC 3RD MATERIAL RESPONSE OVERALL OR MIL-S-6098 MIL SPEC 4TH MATERIAL RESPONSE OVERALL OR MIL-S-6049 MIL SPEC 5TH MATERIAL RESPONSE OVERALL |
| SURFACE TREATMENT | CADMIUM OVERALL AND CHROMATE OVERALL |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416 TY 2 CL 3 FED SPEC ALL TREATMENT RESPONSES OVERALL |
| THREAD SERIES DESIGNATOR | UNJF |
| SPECIFICATION/STANDARD DATA | 80205-NAS1153 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD |
| A SCREW, MACHINE or SCREW, CAP, SOCKET HEAD whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth ( . 1 IN.) ( . 25 mm) or less of a specific diameter for items (1. IN.) (25 mm) or less in diameter. Items over (1. IN.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths ( . 15 IN.) ( . 38 mm) or less. The nominal major diameter of the threads shall be at least one thousandth ( . 1 IN.) ( . 25 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the Screw Thread Standards, FED STD H28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads. |
