Part Number: 110-838-1

(No reviews yet) Write a Review
CONDITION:
NS
BLAW-KNOX CONSTRUCTION EQUIPMENT CO DIV OF WHITE CONSOLIDATED INDUSTRIES INC80906
CECOM LR CENTER97403
MARVEL ENGINEERING COMPANY INC92863
MARVEL ENGINEERING COMPANY INC92863
KALMAR AC INC0AHU0
KALMAR AC INC0AHU0
MARATHON LE TOURNEAU CO95685
AIR ARMAMENT CENTER/ EN18894
MARATHON LE TOURNEAU CO95685
KALMAR AC INC0AHU0
BALDWIN FILTERS INC12658
BALDWIN FILTERS INC12658
CUMMINS FILTRATION INC33457
HASTINGS MANUFACTURING COMPANY LLC74069
ARVINMERITOR INC64829
GENERAL MOTORS CORP AC ROCHESTER DIV70040
GENERAL MOTORS LLC7X677
BODY DIAMETER3.875 INCHES NOMINAL
FILTRATION RATING IN MICRONS10.0 NOMINAL
FLOW DIRECTIONOUTSIDE IN
FILTERING SURFACE AREAANY ACCEPTABLE
DROP PRESSURENOT RATED
DIFFERENTIAL PRESSURENOT RATED
DESIGN TYPENONREUSABLE
TEMP RATINGNOT RATED
BODY OVERALL LENGTH5.750 INCHES NOMINAL
NOMINAL THREAD SIZE1.313 INCHES
CRITICALITY CODE JUSTIFICATIONFEAT
FILTERING MEDIA DESIGNPLEATED SINGLE FILTERING MEDIA RESPONSE
FILTERING SYSTEM FOR WHICH DESIGNEDFULL FLOW
SPECIAL FEATURESWEAPON SYSTEM ESSENTIAL
MATERIALRUBBER SYNTHETIC SEAL
MATERIALPAPER FILTERING MEDIUM
MEDIA FOR WHICH DESIGNEDFUEL/OIL, HYDROCARBON
PROPRIETARY CHARACTERISTICSPACS
STYLE DESIGNATORA14 CYLINDRICAL W/INTEGRAL OUTER CASING
GENERAL CHARACTERISTICS ITEM DESCRIPTIONINSIDE 12 BY 2.375 IN. SIZE TOP 11.25 BY 1.75 IN. AT BOTTOM 21.75 IN. H; 16 LB ICE RATE CAP.; WELDED; W/COVER; FEAT 2 HOLES 0.375 IN. DIA REAR TOP FOR LIFTING
THREAD SERIES DESIGNATORUN
A replaceable device designed to remove solid particles from fluids ranging in density from heavy liquids to gases. The removal of particles is accomplished by porous material (metallic or non-metallic), stacked disks, wound wire, or the like, constructed so the fluid can flow through the device while the solid particles are retained. It may be designed to fit into a FILTER, FLUID (or similar cavity), or it may have an integral outer casing and mounting facilities and be designed to connect directly to an engine, compressor, or the like. The degree of removal of particles must be nominally rated at less than 5 microns or absolutely rated at less than 75 microns. Excludes FILTER ELEMENT, AIR CONDITIONING. See also STRAINER ELEMENT, SEDIMENT.