Part Number: 110786-013

(No reviews yet) Write a Review
CONDITION:
NS
HARRIS CORPORATION91417
ROCKWELL COLLINS, INC.95105
EDO9017
L-3 COMMUNICATIONS CORPORATION11447
LOCKHEED MARTIN CORP LOCKHEED MARTIN INFORMATION SYSTEMS AUTOMATED SPARES49671
L-3 COMMUNICATIONS CORPORATION34228
MBDA UK LTDK0967
US ARMY COMMUNICATIONS & ELECTRONICS MATERIEL READINESS COMMAND LOGISTICS ENGINEERING DIR80063
PATTONAIR USA INC UNISEAL DIV2310
ANIXTER INC.0EER9
NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC NOT FOR RFQ OR SOLICITATION USE80205
A P M HEXSEAL CORPORATION97539
A P M HEXSEAL CORPORATION97539
DRS ICAS, LLC12115
DRS ICAS, LLC12115
A P M HEXSEAL CORPORATION97539
A P M HEXSEAL CORPORATION97539
US ARMY COMMUNICATIONS & ELECTRONICS MATERIEL READINESS COMMAND LOGISTICS ENGINEERING DIR80063
A P M HEXSEAL CORPORATION97539
A P M HEXSEAL CORPORATION97539
THREAD CLASS2A
THREAD DIRECTIONRIGHT-HAND
THREAD LENGTH0.282 INCHES MINIMUM AND 0.375 INCHES MAXIMUM
FASTENER LENGTH0.344 INCHES MINIMUM AND 0.375 INCHES MAXIMUM
HEAD STYLEA44 WATERTIGHT
HEAD DIAMETER0.256 INCHES MINIMUM AND 0.294 INCHES MAXIMUM
HEAD HEIGHT0.087 INCHES MINIMUM AND 0.097 INCHES MAXIMUM
INTERNAL DRIVE STYLEB1 CROSS RECESS TYPE 1
NOMINAL THREAD DIAMETER0.138 INCHES
THREAD QUANTITY PER INCH32
SCREW MATERIALSTEEL COMP 302 OR STEEL COMP 304 OR STEEL COMP 305
SCREW MATERIAL DOCUMENT AND CLASSIFICATIONQQ-P-763 FED SPEC ALL MATERIAL RESPONSES
SCREW SURFACE TREATMENTPASSIVATE
SCREW SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE
SPECIAL FEATURESFURNISHED WITH 1 TEFLON WASHER AND 1 SILICONE O-RING
PROPRIETARY CHARACTERISTICSPACS
THREAD SERIES DESIGNATORUNC
NONDEFINITIVE SPEC/STD DATA2 TYPE AND 10P STYLE
An externally threaded fastener whose threaded portion is of one nominal diameter, No ( . 6 in./1.5 mm) or larger, designed to be held or driven with either a wrench or an inserted driver or both (excluding internal socket or internal multiple spline types), in sizes below No. 1 ( .19 in./5 mm). No. 1 and larger sizes must have a head designed for any type inserted driver (excluding internal socket or internal multiple spline types), but may also be designed for external wrenching. A locking feature may be incorporated in the design of the head or threads. Excludes BOLT, CLEVIS; BOLT, EXTERNALLY RELIEVED BODY; SCREW, EXTERNALLY RELIEVED BODY; and SCREW, ASSEMBLED WASHER. See also, SCREW, INSTRUMENT; BOLT, MACHINE; BOLT, INTERNAL WRENCHING; and SCREW, CAP SOCKET HEAD.