| ASTRONAUTICS CORPORATION OF AMERICA | 10138 |
| NORTHROP GRUMMAN CORP ELECTRONIC SYSTEMS DEFENSIVE SYSTEM DIV | 22915 |
| GE AVIATION SYSTEMS LLC | 35351 |
| NORTHROP GRUMMAN CORP ELECTRONIC SYSTEMS DEFENSIVE SYSTEM DIV | 22915 |
| LOCKHEED MARTIN LIBRASCOPE CORP | 36090 |
| ROCKWELL COLLINS, INC. | 13499 |
| ROCKWELL COLLINS, INC. | 95105 |
| L-3 COMMUNICATIONS CORPORATION | 34228 |
| SEASTROM MANUFACTURING CO., INC. | 86928 |
| NORTHROP GRUMMAN SYSTEMS CORPORATION | 34860 |
| NAVAIR AND NAVSEA MANAGED ORIGINAL DESIGN ACTIVITY DWG NOT MATERIAL/PARTS SUPPLIER | 10001 |
| HONEYWELL INTL INC DEFENSE AVIONICS SYSTEMS FORMER BENDIX NAVIGATION AND CONTROL SYSTEMS | 19315 |
| HONEYWELL INTL INC DEFENSE AVIONICS SYSTEMS | 55972 |
| DESIGNATRONICS INCORPORATED | 328 |
| W. M. BERG INC | 29440 |
| CROSS-SECTIONAL SHAPE STYLE | RECTANGULAR |
| HOLE DIAMETER | 0.125 INCHES MINIMUM AND 0.127 INCHES MAXIMUM |
| PERIPHERAL SHAPE STYLE | ROUND |
| CENTER HOLE SHAPE STYLE | ROUND |
| THICKNESS | 0.009 INCHES MINIMUM AND 0.011 INCHES MAXIMUM |
| OVERALL DIAMETER | 0.188 INCHES MINIMUM AND 0.191 INCHES MAXIMUM |
| SURFACE FINISH | 32.0 MICROINCHES ALL SURFACES |
| MATERIAL | STEEL COMP 302 OVERALL |
| MATERIAL DOCUMENT AND CLASSIFICATION | AISI ASSN STD SINGLE MATERIAL RESPONSE OVERALL |
| SURFACE TREATMENT | PASSIVATE OVERALL |
| GENERAL CHARACTERISTICS ITEM DESCRIPTION | CRES PER QQ-S-763,1.546 IN LG.,0.190-32 UNF-2A THD,0.312 THD LG.,SLOT DRIVE |
| A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch ( .8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be . 6 inches ( .15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be . 16 inches ( .4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items. |
