Part Number: 1118813-110

(No reviews yet) Write a Review
CONDITION:
NS
COMET INDUSTRIES INC96992
BOEING COMPANY, THE94756
ROCKWELL COLLINS, INC.13499
ZF INDUSTRIEANTRIEBE WITTEN GMBHD9182
ZF INDUSTRIEANTRIEBE WITTEN GMBHD9182
NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC NOT FOR RFQ OR SOLICITATION USE80205
MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M96906
ZF INDUSTRIEANTRIEBE WITTEN GMBHD9182
ALLIED PRODUCTS CORP PHEOLL MFG CO DIV77250
THREAD CLASS2A
THREAD DIRECTIONRIGHT-HAND
THREAD LENGTH1.938 INCHES MINIMUM AND 2.000 INCHES MAXIMUM
FASTENER LENGTH2.000 INCHES NOMINAL
HEAD STYLEPAN
HEAD DIAMETER0.357 INCHES MINIMUM AND 0.373 INCHES MAXIMUM
HEAD HEIGHT0.122 INCHES MINIMUM AND 0.133 INCHES MAXIMUM
INTERNAL DRIVE STYLECROSS RECESS TYPE 1
III END ITEM IDENTIFICATIONW/S:AIRCRAFT (AC-130H, MC-130H, EC-130E, HC-130); STREAM (STD. TENSIONED REPLENISHMENT AT SEA METHOD); FIRE CONTROL SYSTEM, MK 92 (FCS); SUPPORT EQUIPMENT, B-1 AIRCRAFT; REPAIR FACILITY, OA8991; COMMUNICATIONS TERMINAL, SATELLITE AN/GSC-39(V)1; MISSILE, AIR-TO-AIR, PHOENIX (AIM-54); MISSILE, AIR INTERCEPT, SIDEWINDER (AIM-9); GROUND MOBILE FORCE SATELLITE COMM TERM (AN/TSC-85A)
NOMINAL THREAD DIAMETER0.190 INCHES
THREAD QUANTITY PER INCH32
MINIMUM TENSILE STRENGTH80000 POUNDS PER SQUARE INCH
SCREW MATERIALSTEEL COMP 302 OR STEEL COMP 303 OR STEEL COMP 304 OR STEEL COMP 305 OR STEEL COMP 316
SCREW MATERIAL DOCUMENT AND CLASSIFICATION66 FED STD ALL MATERIAL RESPONSES
SCREW SURFACE TREATMENTPASSIVATE
SCREW SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE
THREAD SERIES DESIGNATORUNF
An externally threaded fastener whose threaded portion is of one nominal diameter, No ( . 6 in./1.5 mm) or larger, designed to be held or driven with either a wrench or an inserted driver or both (excluding internal socket or internal multiple spline types), in sizes below No. 1 ( .19 in./5 mm). No. 1 and larger sizes must have a head designed for any type inserted driver (excluding internal socket or internal multiple spline types), but may also be designed for external wrenching. A locking feature may be incorporated in the design of the head or threads. Excludes BOLT, CLEVIS; BOLT, EXTERNALLY RELIEVED BODY; SCREW, EXTERNALLY RELIEVED BODY; and SCREW, ASSEMBLED WASHER. See also, SCREW, INSTRUMENT; BOLT, MACHINE; BOLT, INTERNAL WRENCHING; and SCREW, CAP SOCKET HEAD.