| BOEING COMPANY, THE | 94756 |
| ANTENNA PRODUCTS CORPORATION | 6032 |
| ROCKWELL COLLINS, INC. | 13499 |
| ZF INDUSTRIEANTRIEBE WITTEN GMBH | D9182 |
| EVANS & SUTHERLAND COMPUTER CORPORATION | 53938 |
| LOCKHEED MARTIN CORPORATION | 2734 |
| L-3 COMMUNICATIONS CORPORATION | 11447 |
| LOCKHEED MARTIN CORP LOCKHEED MARTIN INFORMATION SYSTEMS AUTOMATED SPARES | 49671 |
| THALES DEFENSE & SECURITY, INC. | 65597 |
| MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M | 96906 |
| NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC NOT FOR RFQ OR SOLICITATION USE | 80205 |
| MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M | 96906 |
| NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC NOT FOR RFQ OR SOLICITATION USE | 80205 |
| ALLIED PRODUCTS CORP PHEOLL MFG CO DIV | 77250 |
| THREAD CLASS | 2A |
| THREAD DIRECTION | RIGHT-HAND |
| THREAD LENGTH | 1.750 INCHES MINIMUM |
| FASTENER LENGTH | 2.500 INCHES NOMINAL |
| HEAD STYLE | A23 PAN |
| HEAD DIAMETER | 0.357 INCHES MINIMUM AND 0.373 INCHES MAXIMUM |
| HEAD HEIGHT | 0.122 INCHES MINIMUM AND 0.133 INCHES MAXIMUM |
| INTERNAL DRIVE STYLE | B1 CROSS RECESS TYPE 1 |
| END ITEM IDENTIFICATION | W/S:SUPPORT EQUIPMENT, B-1 AIRCRAFT;MISSILE, AIR INTERCEPT, SIDEWINDER (AIM-9); AIRCRAFT, (AC-130H, MC-130H, EC-130E, HC-130); AIRCRAFT, C-2A (REPROCURED); TACTICAL AIR OPNS MODULE (AN/TYQ-23)); MISSILE, AIR-TO-GROUND, HARM; SUPPORT EQUIPMENT, B-52 AIRCRAFT; CLOSE IN WEAPON SYSTEM (CIWS-PHALANX); STREAM (STD. TENSIONED REPLENISHMENT AT SEA METHOD) |
| NOMINAL THREAD DIAMETER | 0.190 INCHES |
| THREAD QUANTITY PER INCH | 32 |
| MINIMUM TENSILE STRENGTH | 80000 POUNDS PER SQUARE INCH |
| SCREW MATERIAL | STEEL COMP 302 OR STEEL COMP 303 OR STEEL COMP 304 OR STEEL COMP 305 OR STEEL COMP 316 |
| SCREW MATERIAL DOCUMENT AND CLASSIFICATION | 66 FED STD ALL MATERIAL RESPONSES |
| SCREW SURFACE TREATMENT | PASSIVATE |
| SCREW SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE |
| PROPRIETARY CHARACTERISTICS | PACS |
| THREAD SERIES DESIGNATOR | UNF |
| NONDEFINITIVE SPEC/STD DATA | 2 TYPE AND Y10P STYLE AND 8 GRADE |
| An externally threaded fastener whose threaded portion is of one nominal diameter, No ( . 6 in./1.5 mm) or larger, designed to be held or driven with either a wrench or an inserted driver or both (excluding internal socket or internal multiple spline types), in sizes below No. 1 ( .19 in./5 mm). No. 1 and larger sizes must have a head designed for any type inserted driver (excluding internal socket or internal multiple spline types), but may also be designed for external wrenching. A locking feature may be incorporated in the design of the head or threads. Excludes BOLT, CLEVIS; BOLT, EXTERNALLY RELIEVED BODY; SCREW, EXTERNALLY RELIEVED BODY; and SCREW, ASSEMBLED WASHER. See also, SCREW, INSTRUMENT; BOLT, MACHINE; BOLT, INTERNAL WRENCHING; and SCREW, CAP SOCKET HEAD. |
