| ZF INDUSTRIEANTRIEBE WITTEN GMBH | D9182 |
| VELAN VALVE CORPORATION | 57574 |
| ZF INDUSTRIEANTRIEBE WITTEN GMBH | D9182 |
| MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M | 81349 |
| THREAD CLASS | 3A NUT THREAD |
| THREAD CLASS | 5A STUD THREAD |
| THREAD DIRECTION | RIGHT-HAND NUT THREAD |
| THREAD DIRECTION | RIGHT-HAND STUD THREAD |
| THREAD LENGTH | 0.750 INCHES MINIMUM NUT THREAD |
| THREAD LENGTH | 0.750 INCHES MINIMUM STUD THREAD |
| OVERALL LENGTH | 1.500 INCHES NOMINAL |
| THREAD QUANTITY PER INCH | 16 NUT THREAD |
| THREAD QUANTITY PER INCH | 16 STUD THREAD |
| NOMINAL THREAD SIZE | 0.375 INCHES NUT THREAD |
| NOMINAL THREAD SIZE | 0.375 INCHES STUD THREAD |
| MATERIAL | NICKEL ALLOY 400 |
| MATERIAL DOCUMENT AND CLASSIFICATION | QQ-N-281,CL A FED SPEC SINGLE MATERIAL RESPONSE |
| THREAD SERIES DESIGNATOR | UNC NUT THREAD |
| THREAD SERIES DESIGNATOR | UNC STUD THREAD |
| NONDEFINITIVE SPEC/STD DATA | 1 TYPE AND A STYLE |
| THREAD CLASS | 3A NUT THREAD |
| THREAD CLASS | 5A STUD THREAD |
| THREAD DIRECTION | RIGHT-HAND NUT THREAD |
| THREAD DIRECTION | RIGHT-HAND STUD THREAD |
| THREAD LENGTH | 0.750 INCHES MINIMUM NUT THREAD |
| THREAD LENGTH | 0.750 INCHES MINIMUM STUD THREAD |
| OVERALL LENGTH | 1.500 INCHES NOMINAL |
| THREAD QUANTITY PER INCH | 16 NUT THREAD |
| THREAD QUANTITY PER INCH | 16 STUD THREAD |
| NOMINAL THREAD SIZE | 0.375 INCHES NUT THREAD |
| NOMINAL THREAD SIZE | 0.375 INCHES STUD THREAD |
| MATERIAL | NICKEL ALLOY 400 |
| MATERIAL DOCUMENT AND CLASSIFICATION | QQ-N-281,CL A FED SPEC SINGLE MATERIAL RESPONSE |
| THREAD SERIES DESIGNATOR | UNC NUT THREAD |
| THREAD SERIES DESIGNATOR | UNC STUD THREAD |
| NONDEFINITIVE SPEC/STD DATA | 1 TYPE AND A STYLE |
| A headless fastener not exceeding 12 inches (3 4.8 mm) in length, threaded externally on both ends with threads of the same nominal diameter. The maximum diameter of the unthreaded portion must not be greater than the nominal thread diameter plus . 2 inches ( .5 8 mm). The unthreaded portion must be without locking or wrenching provisions. It may be thread relieved. See also ROD, THREADED END and ROD, CONTINUOUS THREAD. |
