| HONEYWELL INTERNATIONAL INC. | 8815 |
| BEI SENSORS & SYSTEMS COMPANY, INC. | 11534 |
| ASTRONAUTICS CORPORATION OF AMERICA | 10138 |
| SERVO INSTRUMENT CORPORATION | 19176 |
| SECTION QUANTITY | 1 |
| BODY STYLE | CYLINDRICAL SERVO MOUNTED |
| RELIABILITY INDICATOR | NOT ESTABLISHED |
| PILOT DIAMETER | 0.5000 INCHES NOMINAL |
| PILOT LENGTH | 0.0400 INCHES NOMINAL |
| OVERALL LENGTH | 1.121 INCHES MAXIMUM |
| UNDERCUT DIAMETER | 0.965 INCHES NOMINAL |
| UNDERCUT WIDTH | 0.0730 INCHES MINIMUM |
| BODY DIAMETER | 1.062 INCHES MAXIMUM |
| SHAFT DIAMETER | 0.1248 INCHES NOMINAL |
| SHAFT LENGTH | 0.465 INCHES NOMINAL |
| BODY LENGTH | 0.625 INCHES MAXIMUM |
| OVERALL DIAMETER | 1.162 INCHES MAXIMUM |
| MOUNTING LIP DIAMETER | 1.0620 INCHES MAXIMUM |
| MOUNTING LIP DEPTH | 0.0930 INCHES NOMINAL |
| SHAFT STYLE | ROUND, SLOTTED |
| SHAFT BEARING TYPE | BALL |
| ACTUATOR TYPE | SINGLE SHAFT |
| EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION | 340.0 NOMINAL |
| MAXIMUM STARTING TORQUE | 1.10 INCH-OUNCES |
| MAXIMUM RUNNING TORQUE | 1.00 INCH-OUNCES |
| SHAFT END PLAY | 0.005 INCHES |
| SHAFT RUNOUT | 0.002 INCHES |
| LATERAL RUNOUT | 0.004 INCHES |
| PILOT DIAMETER RUNOUT | 0.002 INCHES |
| SHAFT RADIAL PLAY | 0.0035 INCHES |
| FRAGILITY FACTOR | MODERATELY RUGGED |
| TERMINAL LOCATION | RADIALLY POSITIONED OVER MORE THAN HALF THE CIRCUMFERENCE |
| MOUNTING METHOD | CLAMP RING |
| ELECTRICAL RESISTANCE PER SECTION | 40.0 KILOHMS SINGLE SECTION |
| ROTARY ACTUATOR TRAVEL IN ANGULAR DEG | 360.0 NOMINAL |
| FUNCTION CONFORMITY TOLERANCE PER SECTION | -1.00/+1.00 SINGLE SECTION |
| FUNCTION CONFORMITY PER SECTION | SINGLE SECTION INDEPENDENT LINEARITY |
| FIXED TAP QUANTITY PER SECTION | 4 SINGLE SECTION |
| TAP LOCATION TOLERANCE PER SECTION | -10.0/+10.0 DEG ANGULAR ROTATION ALL SECTIONS |
| RESISTANCE TOLERANCE PER SECTION IN PERCENT | -10.0/+10.0 SINGLE SECTION |
| ACTUATOR TRAVEL CONTROL FEATURE | CONTINUOUS MOTION |
| FUNCTION CHARACTERISTIC PER SECTION | SINGLE SECTION GRAPH |
| TEST DATA DOCUMENT | 10138-14313 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) |
| TERMINAL TYPE AND QUANTITY | 5 TURRET |
| A resistor in which a sliding or rolling contact moves over an exposed area of the resistive element to change the ohmic value of the output. The functional tolerance (linearity) of the output is equal to or less than plus or munus 1 percent on linear outputs. Specified outputs such as sine, cosine, tangent, etc., shall be considered to be precision. For items having manually positioned taps designed to be set and fixed prior to use, see RESISTOR, ADJUSTABLE, For items with step by step variation, see RHEOSTAT and RESISTOR, STEP BY STEP. For tandem-mounted items designed to function together as an attenuator (and rated accordingly), see ATTENUATOR, VARIABLE. Excludes RESISTOR (1), VARIABLE, NONWIRE WOUND, NONPRECISION; RESISTOR (1), VARIABLE, NONWIRE WOUND, PRECISION; and RESISTOR (1), VARIABLE, WIRE WOUND, NONPRECISION. |
