| SPS TECHNOLOGIES, LLC | 56878 |
| SPS TECHNOLOGIES, LLC | 80539 |
| PICATINNY ARSENAL | 19203 |
| NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC NOT FOR RFQ OR SOLICITATION USE | 80205 |
| MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M | 96906 |
| REPUBLIC FASTENER MFG. CORP | 52828 |
| SPS TECHNOLOGIES, LLC | 11815 |
| REPUBLIC FASTENER MFG. CORP | 52828 |
| REPUBLIC FASTENER MFG. CORP. USE CAGE CODE 52828 FOR CATALOGING. | 71087 |
| THREAD CLASS | 3B |
| THREAD DIRECTION | RIGHT-HAND |
| LOCKING FEATURE | PREVAILING TORQUE ALL METAL DESIGN |
| LUBRICATION | DRY FILM LUBRICANT |
| MOUNTING HOLE DIAMETER | 0.098 INCHES MINIMUM AND 0.103 INCHES MAXIMUM |
| NUT STYLE | PLATE |
| NUT LENGTH | 0.948 INCHES MAXIMUM |
| NUT HEIGHT | 0.171 INCHES MAXIMUM |
| PLATE THICKNESS | 0.047 INCHES MAXIMUM |
| PLATE WIDTH | 0.239 INCHES MINIMUM AND 0.265 INCHES MAXIMUM |
| NUT MOUNTING PROVISION | STRAIGHT HOLES |
| MOUNTING HOLE ARRANGEMENT STYLE | 2 HOLES |
| DISTANCE FROM APERTURE CENTER TO MOUNTING HOLE CENTER | 0.339 INCHES MINIMUM AND 0.349 INCHES MAXIMUM |
| CENTER TO CENTER DISTANCE BETWEEN MOUNTING HOLES ALONG LENGTH | 0.686 INCHES MINIMUM AND 0.690 INCHES MAXIMUM |
| TEMP RATING | 450.0 DEG FAHRENHEIT MAXIMUM |
| THREAD SERIES | UNJC |
| THREAD QUANTITY PER INCH | 32 |
| HARDNESS RATING | 49.0 ROCKWELL C MAXIMUM |
| NOMINAL THREAD SIZE | 0.138 INCHES |
| MATERIAL | STEEL OVERALL |
| SURFACE TREATMENT | CADMIUM OVERALL |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416 FED SPEC SINGLE TREATMENT RESPONSE OVERALL |
| A nut with a flanged base of varied shapes which may be plain or mounted by rivets, bolts, welding or integral prongs. An integral feature is incorporated for locking on the threads of a mating member. |
M 12600-82
$0.00
7398700-62
$0.00
RE-62
$0.00
C5178227-62
$0.00
NAJ401-62
$0.00
62-0613
$0.00
LBL-62
$0.00
ST460020-62
$0.00
MS90728-62
$0.00