Part Number: 1276-08-129

(No reviews yet) Write a Review
CONDITION:
NS
FINMECCANICA SPAA0199
ZF INDUSTRIEANTRIEBE WITTEN GMBHD9182
NAVAL SHIP SYSTEMS COMMAND80064
MARE ISLAND NAVAL SHIPYARD82126
PORTSMOUTH NAVAL SHIPYARD81316
NAVAL SHIP SYSTEMS COMMAND80064
NAVAL SHIP SYSTEMS COMMAND80064
NAVAL SHIP SYSTEMS COMMAND80064
ELECTRIC BOAT CORPORATION96169
MOOG INC.7270
HISPANO SUIZA GROUPE SAFRANF0302
SAFRAN LANDING SYSTEMSF6137
MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M96906
MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M96906
PARKER-HANNIFIN CORPORATION50599
CROSS-SECTIONAL SHAPE STYLESQUARE
CROSS-SECTIONAL THICKNESS0.031 INCHES MINIMUM AND 0.036 INCHES MAXIMUM
CROSS-SECTIONAL HEIGHT0.093 INCHES MINIMUM AND 0.108 INCHES MAXIMUM
DISTANCE BETWEEN ENDS0.062 INCHES MINIMUM AND 0.188 INCHES MAXIMUM
CENTER HOLE DIAMETER1.609 INCHES MINIMUM AND 1.641 INCHES MAXIMUM
PERIPHERAL DIAMETER1.977 INCHES MINIMUM AND 2.013 INCHES MAXIMUM
JOINT TYPESCARF-BUTT RETAINER
ANGLE25.0 DEGREES MINIMUM AND 35.0 DEGREES MAXIMUM
MATERIALPLASTIC POLYTETRAFLUOROETHYLENE OVERALL
MATERIAL DOCUMENT AND CLASSIFICATIONMIL-R-8791 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
An item designed to fit over a packing gland by mating with a surface of a second part which together will retain into a narrow groove or confined space the PACKING, PREFORMED or O-RING, or an item designed to fit over a rod or shaft, to mate with a stuffing box to confine PACKING MATERIAL. It may function as a static or dynamic seal retainer with the packing located on, around, or in the centerline direction of the rod or shaft axis. It may have holes or joints for mounting, be threaded or unthreaded. See also PACKING NUT and PACKING NUT, STUFFING TUBE.