Part Number: 13-005-062

(No reviews yet) Write a Review
CONDITION:
NS
ZF INDUSTRIEANTRIEBE WITTEN GMBHD9182
L-3 COMMUNICATIONS CORPORATION34228
THREAD CLASS3A
THREAD DIRECTIONRIGHT-HAND
THREAD LENGTH0.875 INCHES MINIMUM
FASTENER LENGTH1.000 INCHES NOMINAL
HEAD STYLEHEXAGON
HEAD HEIGHT0.234 INCHES NOMINAL
WIDTH BETWEEN FLATS0.625 INCHES NOMINAL
NOMINAL THREAD DIAMETER0.375 INCHES
FEATURES PROVIDEDFINISHED HEAD
THREAD QUANTITY PER INCH16
MATERIALSTEEL COMP 303 OVERALL OR STEEL COMP 430 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATIONASTM A582 ASSN STD 1ST MATERIAL RESPONSE OVERALL
SURFACE TREATMENTPASSIVATE OVERALL
THREAD SERIES DESIGNATORUNC
TERMINAL TYPE AND QUANTITY4 TERMINAL BLOCK W/SCREWS
THREAD CLASS3A
THREAD DIRECTIONRIGHT-HAND
THREAD LENGTH0.875 INCHES MINIMUM
FASTENER LENGTH1.000 INCHES NOMINAL
HEAD STYLEHEXAGON
HEAD HEIGHT0.234 INCHES NOMINAL
WIDTH BETWEEN FLATS0.625 INCHES NOMINAL
NOMINAL THREAD DIAMETER0.375 INCHES
FEATURES PROVIDEDFINISHED HEAD
THREAD QUANTITY PER INCH16
MATERIALSTEEL COMP 303 OVERALL OR STEEL COMP 430 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATIONASTM A582 ASSN STD 1ST MATERIAL RESPONSE OVERALL
SURFACE TREATMENTPASSIVATE OVERALL
THREAD SERIES DESIGNATORUNC
TERMINAL TYPE AND QUANTITY4 TERMINAL BLOCK W/SCREWS
An externally threaded fastener designed for insertion through holes in assembled parts and normally intended to be tightened or released by torquing a nut. The threaded and unthreaded portions are both of one nominal diameter of .19 inch (5 mm) or larger. The head is not designed to be held or driven with an inserted driver or by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads. Head dimensions and sizes of threaded and unthreaded portions shall conform to internationally recognized fastener standards. For items having a grip length portion machined to a tolerance of . 15 inch ( . 38 mm) or less, BOLT, SHEAR. See also SCREW, CAP, HEXAGON HEAD and SCREW, MACHINE.