DRS POWER & CONTROL TECHNOLOGIES, INC. | 27192 |
DEFENSE LOGISTICS AGENCY DBA DEFENSE SUPPLY CENTER PHILADELPHIA | 14153 |
DEFENSE LOGISTICS AGENCY DBA DEFENSE SUPPLY CENTER PHILADELPHIA | 14153 |
THREAD CLASS | 2A NUT THREAD |
THREAD CLASS | 2A STUD THREAD |
THREAD DIRECTION | RIGHT-HAND NUT THREAD |
THREAD DIRECTION | RIGHT-HAND STUD THREAD |
THREAD LENGTH | 1.500 INCHES MINIMUM NUT THREAD AND 1.620 INCHES MAXIMUM NUT THREAD |
THREAD LENGTH | 1.500 INCHES MINIMUM STUD THREAD AND 1.620 INCHES MAXIMUM STUD THREAD |
OVERALL LENGTH | 6.860 INCHES MINIMUM AND 6.880 INCHES MAXIMUM |
THREAD QUANTITY PER INCH | 32 NUT THREAD |
THREAD QUANTITY PER INCH | 32 STUD THREAD |
NOMINAL THREAD SIZE | 0.190 INCHES NUT THREAD |
NOMINAL THREAD SIZE | 0.190 INCHES STUD THREAD |
CRITICALITY CODE JUSTIFICATION | ZZZY |
SPECIAL FEATURES | ITEM MUST COMPLY WITH REQUIREMENTS OF DEFENSE SUPPLY CENTER RICHMOND PRODUCTION STANDARD NO. RO0217 |
MATERIAL | STEEL COMP 303 |
MATERIAL DOCUMENT AND CLASSIFICATION | ASTM A581 ASSN STD SINGLE MATERIAL RESPONSE |
SURFACE TREATMENT | PASSIVATE OVERALL |
SPECIAL TEST FEATURES | SPECIAL QUALITY CONTROL TESTING |
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL |
TEST DATA DOCUMENT | 81349-MIL-P-23199 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). |
THREAD SERIES DESIGNATOR | UNF NUT THREAD |
THREAD SERIES DESIGNATOR | UNF NUT THREAD A |
DEPARTURE FROM CITED DOCUMENT | AS MODIFIED BY MATERIAL |
REFERENCE NUMBER DIFFERENTIATING CHARACTERISTICS | AREFERENCE NUMBER DIFFERENTIATING MATERIAL WILL BE IN ACCORDANCE WITH NAVAL INVENTORY CONTROL POINT ACTIVITY HX QUALITY CONTROL. MANUFACTURING AND TESTING SPECIFICATIONS AVAILABLE AT THE DLA ICP |
THREAD CLASS | 2A NUT THREAD |
THREAD CLASS | 2A STUD THREAD |
THREAD DIRECTION | RIGHT-HAND NUT THREAD |
THREAD DIRECTION | RIGHT-HAND STUD THREAD |
THREAD LENGTH | 1.500 INCHES MINIMUM NUT THREAD AND 1.620 INCHES MAXIMUM NUT THREAD |
THREAD LENGTH | 1.500 INCHES MINIMUM STUD THREAD AND 1.620 INCHES MAXIMUM STUD THREAD |
OVERALL LENGTH | 6.860 INCHES MINIMUM AND 6.880 INCHES MAXIMUM |
THREAD QUANTITY PER INCH | 32 NUT THREAD |
THREAD QUANTITY PER INCH | 32 STUD THREAD |
NOMINAL THREAD SIZE | 0.190 INCHES NUT THREAD |
NOMINAL THREAD SIZE | 0.190 INCHES STUD THREAD |
CRITICALITY CODE JUSTIFICATION | ZZZY |
SPECIAL FEATURES | ITEM MUST COMPLY WITH REQUIREMENTS OF DEFENSE SUPPLY CENTER RICHMOND PRODUCTION STANDARD NO. RO0217 |
MATERIAL | STEEL COMP 303 |
MATERIAL DOCUMENT AND CLASSIFICATION | ASTM A581 ASSN STD SINGLE MATERIAL RESPONSE |
SURFACE TREATMENT | PASSIVATE OVERALL |
SPECIAL TEST FEATURES | SPECIAL QUALITY CONTROL TESTING |
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL |
TEST DATA DOCUMENT | 81349-MIL-P-23199 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). |
THREAD SERIES DESIGNATOR | UNF NUT THREAD |
THREAD SERIES DESIGNATOR | UNF NUT THREAD A |
DEPARTURE FROM CITED DOCUMENT | AS MODIFIED BY MATERIAL |
REFERENCE NUMBER DIFFERENTIATING CHARACTERISTICS | AREFERENCE NUMBER DIFFERENTIATING MATERIAL WILL BE IN ACCORDANCE WITH NAVAL INVENTORY CONTROL POINT ACTIVITY HX QUALITY CONTROL. MANUFACTURING AND TESTING SPECIFICATIONS AVAILABLE AT THE DLA ICP |
A headless fastener not exceeding 12 inches (3 4.8 mm) in length, threaded externally on both ends with threads of the same nominal diameter. The maximum diameter of the unthreaded portion must not be greater than the nominal thread diameter plus . 2 inches ( .5 8 mm). The unthreaded portion must be without locking or wrenching provisions. It may be thread relieved. See also ROD, THREADED END and ROD, CONTINUOUS THREAD. |