Part Number: 16758567-020

(No reviews yet) Write a Review
CONDITION:
NS
SYPRIS ELECTRONICS, LLC28009
BUERKLIN OHGC7080
GE AVIATION SYSTEMS LLC35351
MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M81349
MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M81349
MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M81349
MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M81349
MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M81349
MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M81349
VISHAY DALE ELECTRONICS, LLC91637
VISHAY DALE ELECTRONICS, LLC91637
VISHAY ELECTRONIC GMBH GESCHAEFTSBEREICH DRALORICC2169
VISHAY ELECTRONIC GMBHD1018
VISHAY DALE ELECTRONICS, LLC91637
VISHAY DALE ELECTRONICS, LLC91637
VISHAY DALE ELECTRONICS, LLC91637
VISHAY DALE ELECTRONICS, LLC91637
VISHAY DALE ELECTRONICS, LLC91637
VISHAY DALE ELECTRONICS, LLC91637
VISHAY DALE ELECTRONICS, LLC91637
TEMP COEFFICIENT OF RESISTANCE IN PPM PER DEG CELSIUS-1
III ELECTRICAL RESISTANCE1.000 OHMS
RESISTANCE TOLERANCE IN PERCENT-1
AMBIENT TEMP IN DEG CELSIUS AT FULL RATED POWER25
AMBIENT TEMP IN DEG CELSIUS AT ZERO PERCENT RATED POWER275
TEMP RANGE OF TEMP COEFFICIENT IN DEG CELSIUS-0.2
INCLOSURE METHODENCASED
TERMINAL TYPETAB, SOLDER LUG
RELIABILITY INDICATORESTABLISHED
RELIABILITY FAILURE RATE LEVEL IN PERCENT0.01
TERMINAL LENGTH0.312 INCHES NOMINAL
BODY LENGTH0.750 INCHES NOMINAL
BODY WIDTH0.438 INCHES NOMINAL
BODY HEIGHT0.406 INCHES NOMINAL
DISTANCE BETWEEN CENTERLINES OF MOUNTING FACILITIES PARALLEL TO BODY LENGTH0.562 INCHES NOMINAL
POWER DISSIPATION RATING IN WATTS6.000 FREE AIR
MOUNTING HOLE SIZE0.094 INCHES NOMINAL
STYLE DESIGNATORAXIAL TERMINAL (S)
TEST DATA DOCUMENT81349-MIL-R-39009 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.).
SPECIFICATION/STANDARD DATA81349-MIL-R-39009/1 GOVERNMENT SPECIFICATION
INC 374 3 REINSTATED ON 1 3 3~A resistor whose ohmic value cannot be adjusted or varied. The resistance element consists of high resistance wire (or ribbon) either wound on an insulated form or constructed so as to be self-supporting. The item must have inherent characteristics of inducing self-inductance. Opposition to current flow is an inherent property of the resistance wire and is manifested by the heat dissipation in the resistor. Excludes SUPPRESSOR, IGNITION INTERFERENCE. See also RESISTOR (1), FIXED, WIRE WOUND, NONINDUCTIVE.