Part Number: 172-104

(No reviews yet) Write a Review
CONDITION:
NS
VERNITRON CORP VRN INTERNATIONAL DIV84048
KEYSIGHT TECHNOLOGIES, INC.1LQK8
HEWLETT-PACKARD COMPANY28480
MURATA ERIE NORTH AMERICA INC HEADQUARTERS AND GEORGIA OPNS51406
BOURNS INSTRUMENTS INC80294
BI TECHNOLOGIES CORPORATION73138
BI TECHNOLOGIES CORPORATION73138
NORTH AMERICAN PHILIPS CORP PHILIPS COMPONENTS DISCRETE PRODUCTS DIV19701
SECTION QUANTITY1
BODY STYLERECTANGULAR
RELIABILITY INDICATORNOT ESTABLISHED
III OVERALL LENGTH0.687 INCHES NOMINAL
TERMINAL LENGTH0.312 INCHES NOMINAL
III OVERALL HEIGHT0.290 INCHES NOMINAL
III OVERALL WIDTH0.245 INCHES NOMINAL
BODY LENGTH0.375 INCHES NOMINAL
BODY WIDTH0.245 INCHES NOMINAL
BODY HEIGHT0.290 INCHES NOMINAL
ACTUATOR TYPEFLUSH DRIVE WITH SLOT-HOLE
EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION240.0 NOMINAL
MAXIMUM STARTING TORQUE5.00 INCH-OUNCES
CENTER TO CENTER DISTANCE BETWEEN TERMINALS0.200 INCHES NOMINAL
TERMINAL LOCATIONLOWER ADJACENT SIDE TWO ROWS
MOUNTING METHODTERMINAL
ELECTRICAL RESISTANCE PER SECTION100.0 KILOHMS SINGLE SECTION
ROTARY ACTUATOR TRAVEL IN ANGULAR DEG240.0 NOMINAL
CENTER TO CENTER DISTANCE BETWEEN CENTER TERMINAL AND OUTSIDE TERMINAL0.100 INCHES NOMINAL
AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER150.0 SINGLE SECTION
TEMP COEFFICIENT OF RESISTANCE PER SECTION IN PPM PER DEG CELSIUS-150.0 TO 150.0 SINGLE SECTION
POWER DISSIPATION RATING PER SECTION IN WATTS0.5 FREE AIR SINGLE SECTION
RESISTANCE TOLERANCE PER SECTION IN PERCENT-10.0 TO 10.0 SINGLE SECTION
ACTUATOR TRAVEL CONTROL FEATURESTOPS
AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER85.0 SINGLE SECTION
TERMINAL TYPE AND QUANTITY3 PIN
A resistor in which a sliding or rolling contact moves over an exposed area of the resistive element to change the ohmic value of the output. The functional tolerance (linearity), if given, of the output is greater than plus or minus 1 percent on linear outputs. Specified outputs such as sine, cosine, tangent, etc., shall be considered to be precision. For items having manually positioned taps designed to be set and fixed prior to use, see RESISTOR, ADJUSTABLE. For items with step by step variation, see RHEOSTAT and RESISTOR, STEP BY STEP. For tandem-mounted items designed to function together as an attenuator (and rated accordingly), see ATTENUATOR, VARIABLE. Excludes RESISTOR (1), VARIABLE, WIRE WOUND, NONPRECISION; RESISTOR (1), VARIABLE, NONWIRE WOUND PRECISION; and RESISTOR (1), VARIABLE, WIRE WOUND, PRECISION.