Part Number: 2-130-135-02

(No reviews yet) Write a Review
CONDITION:
NS
HONEYWELL INTERNATIONAL INC.99193
THREAD CLASS3A
THREAD DIRECTIONRIGHT-HAND
THREAD LENGTH0.313 INCHES MINIMUM AND 0.375 INCHES MAXIMUM
FASTENER LENGTH0.375 INCHES NOMINAL
HEAD STYLEDOUBLE HEXAGON W/HOLE
HEAD HEIGHT0.260 INCHES NOMINAL
WIDTH BETWEEN FLATS0.243 INCHES MINIMUM AND 0.251 INCHES MAXIMUM
EXTENDED WASHER DIAMETER0.335 INCHES NOMINAL
EXTENDED WASHER THICKNESS0.055 INCHES MINIMUM AND 0.065 INCHES MAXIMUM
HOLE DIAMETER0.047 INCHES NOMINAL
NOMINAL THREAD DIAMETER0.190 INCHES
HOLE QUANTITY4
HOLE TYPEDRILLED
FEATURES PROVIDEDFINISHED HEAD
THREAD QUANTITY PER INCH32
HARDNESS RATING26.0 ROCKWELL C MINIMUM OVERALL AND 32.0 ROCKWELL C MAXIMUM OVERALL
HOLE CONFIGURATION STYLEDOUBLE HEXAGON LONGITUDINAL HOLE
SURFACE FINISH63.0 MICROINCHES BEARING SURFACE OF HEAD
MATERIALSTEEL COMP 8740 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATIONAMS 6322 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
SURFACE TREATMENTCADMIUM OVERALL
THREAD SERIES DESIGNATORUNJF
An externally threaded fastener designed for insertion through holes in assembled parts and normally intended to be tightened or released by torquing a nut. The threaded and unthreaded portions are both of one nominal diameter of .19 inch (5 mm) or larger. The head is not designed to be held or driven with an inserted driver or by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads. Head dimensions and sizes of threaded and unthreaded portions shall conform to internationally recognized fastener standards. For items having a grip length portion machined to a tolerance of . 15 inch ( . 38 mm) or less, BOLT, SHEAR. See also SCREW, CAP, HEXAGON HEAD and SCREW, MACHINE.