| MOOG INC. | 7270 |
| NAVAL INVENTORY CONTROL POINT MECHANICSBURG | 3950 |
| ZF INDUSTRIEANTRIEBE WITTEN GMBH | D9182 |
| EATON CORPORATION | 99643 |
| NAVAL INVENTORY CONTROL POINT MECHANICSBURG | 3950 |
| ANDERSON GREENWOOD LP DBA ANDERSON GREENWOOD CROSBY | 1343 |
| NAVAL INVENTORY CONTROL POINT MECHANICSBURG | 3950 |
| DRESSER-RAND COMPANY | 0AT62 |
| DRESSER-RAND CO WORTHINGTON COMPRESSOR OPN A JOINT VENTURE | 93236 |
| NAVAL INVENTORY CONTROL POINT MECHANICSBURG | 3950 |
| NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC NOT FOR RFQ OR SOLICITATION USE | 80205 |
| MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M | 81349 |
| NAVAL INVENTORY CONTROL POINT MECHANICSBURG | 3950 |
| ZF INDUSTRIEANTRIEBE WITTEN GMBH | D9182 |
| MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M | 81349 |
| NAVAL INVENTORY CONTROL POINT MECHANICSBURG | 3950 |
| TEMP RATING | -30.0 DEG FAHRENHEIT AND 500.0 DEG FAHRENHEIT |
| CROSS-SECTIONAL HEIGHT | 0.069 INCHES MINIMUM AND 0.075 INCHES MAXIMUM |
| CENTER HOLE DIAMETER | 0.346 INCHES MINIMUM AND 0.356 INCHES MAXIMUM |
| ELONGATION PERCENTAGE | 125 MAXIMUM |
| HARDNESS RATING | 85.0 SHORE DUROMETER A MINIMUM AND 95.0 SHORE DUROMETER A MAXIMUM |
| CRITICALITY CODE JUSTIFICATION | ZZZW |
| MATERIAL | RUBBER FLUOROCARBON CLASS FPM |
| MATERIAL DOCUMENT AND CLASSIFICATION | MIL-R-83248 MIL SPEC SINGLE MATERIAL RESPONSE |
| NONDEFINITIVE SPEC/STD DATA | 1 TYPE AND 2 CLASS |
| DEPARTURE FROM CITED DOCUMENT | CLEANING, PACKAGING, AND MARKING IAW MIL-STD-1330D |
| A nonmetallic circular item with an aperature, having a solid round cross-section. They are used primarily for sealing. For items with other than round cross section, see PACKING,PREFORMED. For noncircular items with a round cross-section, see SEAL,NONMETALLIC ROUND SECTION and RUBBER,ROUND SECTION. |
