BELL HELICOPTER TEXTRON INC. | 97499 |
BELL HELICOPTER TEXTRON INC. | 97499 |
AIRCRAFT FABRICATION AND SERVICE CO INC | 23744 |
INSIDE DIAMETER | 1.150 INCHES NOMINAL |
OUTSIDE DIAMETER | 1.345 INCHES MINIMUM AND 1.355 INCHES MAXIMUM |
OVERALL THICKNESS | 0.050 INCHES NOMINAL |
SURFACE FINISH | 63.0 MICROINCHES BORE |
SURFACE FINISH | 63.0 MICROINCHES LARGEST OUTSIDE DIAMETER |
SURFACE FINISH | 63.0 MICROINCHES LEFT SIDE |
SURFACE FINISH | 63.0 MICROINCHES RIGHT SIDE |
MATERIAL | STEEL COMP 4130 |
MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-18729,COND A MIL SPEC SINGLE MATERIAL RESPONSE |
SURFACE TREATMENT | OXIDE |
MATERIAL THICKNESS | 0.050 INCHES NOMINAL |
END ITEM IDENTIFICATION | AN/GGC-3 TELETYPEWRITER SET |
A circular-shaped item designed to maintain predetermined distance between assembled parts and/or for distributing pressure or preventing endwise movement between member parts. It has a solid cross-section and two flat parallel bearing surfaces. The distance between the bearing surfaces perpendicular to the axis of the centrally located hole shall not exceed 25 percent of the outside diameter. The diameter of the centrally located hole must exceed 75 percent of the outside diameter. Excludes laminated items. For items manufactured from impregnated graphite or lubricated nonmetallic materials, excluding felt or plastics, see GASKET. For items manufactured from lubricated plastics, see BEARING, WASHER, THRUST. For items manufactured from lubricated felt, see FELT, MECHANICAL, PREFORMED. Excludes DISK, VALVE; INSULATOR WASHER; and SHIM. See also SPACER, PLATE and SPACER, SLEEVE. |