Part Number: 2070-96 ITEM 12

(No reviews yet) Write a Review
CONDITION:
NS
HUNTINGTON INGALLS INCORPORATED43689
NAVAL INVENTORY CONTROL POINT MECHANICSBURG3950
BODY OUTSIDE DIAMETER2.8360 INCHES MINIMUM AND 2.8380 INCHES MAXIMUM
BODY INSIDE DIAMETER2.5010 INCHES MINIMUM AND 2.5030 INCHES MAXIMUM
FLANGE OUTSIDE DIAMETER4.5000 INCHES NOMINAL
FLANGE WIDTH0.2500 INCHES NOMINAL
CORNER SHAPECHAMFERED LEFT FLANGE OUTSIDE RIGHT CORNER
CORNER SHAPESQUARE LEFT FLANGE BODY CORNER
SURFACE FINISH63.0 MICROINCHES INSIDE DIAMETER SURFACE OF BODY
SURFACE FINISH63.0 MICROINCHES OUTSIDE DIAMETER SURFACE OF BODY
SURFACE FINISH63.0 MICROINCHES RIGHT SIDE
SURFACE FINISH125.0 MICROINCHES LEFT END SURFACE OF BODY AND FLANGE
STYLE DESIGNATORSOLID, EXTERNAL FLANGE ONE END
REFERENCE NUMBER DIFFERENTIATING CHARACTERISTICSITEM THAT SUPPORTS A LEVEL 1 OR SUBSAFE CRITICAL SYSTEM THAT HAS UNDERGONE QUALITY ASSURANCE FURING THE ACQUISITION PROCESS
A tubular shaped item with or without flange(s) designed to reduce friction and carry a kinetic load on the surface(s) parallel to the axis of the bore. It must have a visible or detectable means of lubrication or be self-lubricated. The over all length must exceed 25 percent of the outside diameter or the shortest distance between peripheral flats of the body, except for straight tubular (without flange or shoulder) items having a bearing surface(s) parallel to the axis of the bore only. Includes items which are divided into two or more segments which include 18 degrees (3.141 radians) or less of the bearing periphery. See also BUSHING, SLEEVE; SPACER, SLEEVE; and WASHER (as modified). Excludes PIN, HOLLOW.