Part Number: 2076-4299-001

(No reviews yet) Write a Review
CONDITION:
NS
ANTENNA PRODUCTS CORPORATION6032
PARKER-HANNIFIN CORPORATION9F512
BAE SYSTEMS SURVIVABILITY SYSTEMS LLC6W728
E.C.A ETABLISSEMENT CENTRALD'APPROVISIONNEMENT DES FORCES ARMEESCY13
INSPEKTORAT WSPARCIA SIL ZBROJNYCH9009H
AMERICAN NATIONAL STANDARDS INSTITUTE, INCORPORATED80204
PARKER-HANNIFIN CORPORATION9F512
PARKER-HANNIFIN CORPORATION9F512
MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M96906
THREAD CLASS2A
THREAD DIRECTIONRIGHT-HAND
THREAD LENGTH1.000 INCHES MINIMUM AND 1.188 INCHES MAXIMUM
FASTENER LENGTH4.406 INCHES MINIMUM AND 4.500 INCHES MAXIMUM
HEAD STYLEHEXAGON
HEAD HEIGHT0.226 INCHES MINIMUM AND 0.243 INCHES MAXIMUM
WIDTH BETWEEN FLATS0.551 INCHES MINIMUM AND 0.562 INCHES MAXIMUM
END ITEM IDENTIFICATIONMRAP BUFFALO MK2A2; MRAP - COUGAR CAT1 A2
NOMINAL THREAD DIAMETER0.375 INCHES
THREAD QUANTITY PER INCH16
MINIMUM TENSILE STRENGTH150000 POUNDS PER SQUARE INCH
SURFACE FINISH63.0 MICROINCHES THREADS
MATERIALSTEEL OVERALL
MATERIAL DOCUMENT AND CLASSIFICATIONSAE J429 GRADE 8 ASSN STD SINGLE MATERIAL RESPONSE OR ASTM A354 GRADE BD ASSN STD SINGLE MATERIAL RESPONSE OVERALL
SURFACE TREATMENTZINC AND CHROMATE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONASTM B633 TY 2 SC 3 ASSN STD SINGLE TREATMENT RESPONSE OVERALL
THREAD SERIES DESIGNATORUNC
OPERATING TEMP RANGENOT RATED
An externally threaded fastener designed for insertion into holes in assembled parts, for mating with a preformed internal thread and for tightening or releasing by torquing the head. The threaded and unthreaded portions are both of the same nominal diameter of .19 inch (5 mm) or larger. Head dimensions and sizes of threaded and unthreaded portions shall conform to internationally recognized fastener standards. The thread length being the controlled dimension, the grip length is not specified. A locking feature may be incorporated in the design of the head or threads. Excludes BOLT, MACHINE; BOLT, EXTERNALLY RELIEVED BODY; BOLT, INTERNAL WRENCHING; and SCREW, CAP, SOCKET HEAD.