Part Number: 2100-0010

(No reviews yet) Write a Review
CONDITION:
NS
CLAROSTAT SENSORS AND CONTROLS12697
HEWLETT-PACKARD COMPANY28480
HEWLETT-PACKARD COMPANY28480
TEKTRONIX, INC.80009
CLAROSTAT SENSORS AND CONTROLS12697
CLAROSTAT SENSORS AND CONTROLS12697
HEICO OHMITE, L.L.C.44655
MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M81349
ROCKWELL AUTOMATION, INC.1121
MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M81349
MOUNTING METHODSTANDARD BUSHING
ELECTRICAL RESISTANCE PER SECTION2.0 KILOHMS SINGLE SECTION
ROTARY ACTUATOR TRAVEL IN ANGULAR DEG309.0 MINIMUM AND 320.0 MAXIMUM
AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER120.0 SINGLE SECTION
POWER DISSIPATION RATING PER SECTION IN WATTS2.0 FREE AIR SINGLE SECTION
RESISTANCE TOLERANCE PER SECTION IN PERCENT-10.0 TO 10.0 SINGLE SECTION
SCREW THREAD DIAMETER0.375 INCHES NOMINAL
SCREW THREAD SERIES DESIGNATORUNEF
SCREW THREAD QUANTITY PER INCH32
TERMINAL LOCATIONRADIALLY POSITIONED OVER LESS THAN HALF THE CIRCUMFERENCE
SECTION QUANTITY1
BODY STYLECYLINDRICAL BUSHING MOUNTED
RELIABILITY INDICATORNOT ESTABLISHED
III OVERALL LENGTH1.437 INCHES NOMINAL
BODY DIAMETER1.094 INCHES NOMINAL
SHAFT DIAMETER0.250 INCHES NOMINAL
SHAFT LENGTH0.875 INCHES NOMINAL
MOUNTING BUSHING LENGTH0.375 INCHES NOMINAL
BODY LENGTH0.562 INCHES NOMINAL
III OVERALL DIAMETER1.484 INCHES NOMINAL
SHAFT STYLEROUND, SLOTTED
ACTUATOR TYPESINGLE SHAFT
MAXIMUM STARTING TORQUE6.00 INCH-OUNCES
MAXIMUM RUNNING TORQUE1.00 INCH-OUNCES
MAXIMUM STOP TORQUE128.00 INCH-OUNCES
NONTURN DEVICE LOCATIONAT 9 OCLOCK
NONTURN DEVICE RADIUS0.531 INCHES NOMINAL
ACTUATOR TRAVEL CONTROL FEATURESTOPS
AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER70.0 SINGLE SECTION
TEST DATA DOCUMENT81349-MIL-R-94 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.).
TERMINAL TYPE AND QUANTITY3 TAB, SOLDER LUG
SPECIFICATION/STANDARD DATA81349-MIL-R-94/5 GOVERNMENT SPECIFICATION
THREAD SERIES DESIGNATORUNC
A resistor in which a sliding or rolling contact moves over an exposed area of the resistive element to change the ohmic value of the output. The functional tolerance (linearity), if given, of the output is greater than plus or minus 1 percent on linear outputs. Specified outputs such as sine, cosine, tangent, etc., shall be considered to be precision. For items having manually positioned taps designed to be set and fixed prior to use, see RESISTOR, ADJUSTABLE. For items with step by step variation, see RHEOSTAT and RESISTOR, STEP BY STEP. For tandem-mounted items designed to function together as an attenuator (and rated accordingly), see ATTENUATOR, VARIABLE. Excludes RESISTOR (1), VARIABLE, WIRE WOUND, NONPRECISION; RESISTOR (1), VARIABLE, NONWIRE WOUND PRECISION; and RESISTOR (1), VARIABLE, WIRE WOUND, PRECISION.