Part Number: 2100-3279

(No reviews yet) Write a Review
CONDITION:
NS
KEYSIGHT TECHNOLOGIES, INC.1LQK8
HEWLETT-PACKARD COMPANY28480
CTS CORP ELECTROMECHANICAL DIV58756
CTS CORP71450
SECTION QUANTITY1
BODY STYLECYLINDRICAL BUSHING MOUNTED
RELIABILITY INDICATORNOT ESTABLISHED
III OVERALL LENGTH1.687 INCHES NOMINAL
BODY DIAMETER0.641 INCHES NOMINAL
SHAFT DIAMETER0.125 INCHES NOMINAL
SHAFT LENGTH0.750 INCHES NOMINAL
MOUNTING BUSHING LENGTH0.375 INCHES NOMINAL
BODY LENGTH0.937 INCHES NOMINAL
SHAFT STYLEROUND
SWITCH TYPEPUSH-PULL
SWITCH VOLTAGE RATING IN VOLTS20
ACTUATOR TYPESINGLE SHAFT
EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION300.0 NOMINAL
NONTURN DEVICE LOCATIONAT 9 OCLOCK
NONTURN DEVICE RADIUS0.375 INCHES NOMINAL
SWITCH OPERATING POSITIONANY POSITION OF ROTATION TRAVEL
SWITCH CONTACT ARRANGEMENTSINGLE POLE, SINGLE THROW, NORMALLY OPEN, BOTH POSITIONS MAINTAINED
SCREW THREAD DIAMETER0.250 INCHES NOMINAL
SCREW THREAD SERIES DESIGNATORUNEF
SCREW THREAD QUANTITY PER INCH32
TERMINAL LOCATIONREAR-BOTTOM
MOUNTING METHODSTANDARD BUSHING
FEATURES PROVIDEDSWITCH
ELECTRICAL RESISTANCE PER SECTION200.0 KILOHMS SINGLE SECTION
ROTARY ACTUATOR TRAVEL IN ANGULAR DEG300.0 NOMINAL
AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER85.0 SINGLE SECTION
POWER DISSIPATION RATING PER SECTION IN WATTS0.2 FREE AIR SINGLE SECTION
RESISTANCE TOLERANCE PER SECTION IN PERCENT-20.0 TO 20.0 SINGLE SECTION
ACTUATOR TRAVEL CONTROL FEATURESTOPS
AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER55.0 SINGLE SECTION
SWITCH CURRENT TYPE AND RATING IN AMPS1.000 AC
TERMINAL TYPE AND QUANTITY5 TAB, SOLDER LUG
A resistor in which a sliding or rolling contact moves over an exposed area of the resistive element to change the ohmic value of the output. The functional tolerance (linearity), if given, of the output is greater than plus or minus 1 percent on linear outputs. Specified outputs such as sine, cosine, tangent, etc., shall be considered to be precision. For items having manually positioned taps designed to be set and fixed prior to use, see RESISTOR, ADJUSTABLE. For items with step by step variation, see RHEOSTAT and RESISTOR, STEP BY STEP. For tandem-mounted items designed to function together as an attenuator (and rated accordingly), see ATTENUATOR, VARIABLE. Excludes RESISTOR (1), VARIABLE, WIRE WOUND, NONPRECISION; RESISTOR (1), VARIABLE, NONWIRE WOUND PRECISION; and RESISTOR (1), VARIABLE, WIRE WOUND, PRECISION.