Part Number: 2108-06356

(No reviews yet) Write a Review
CONDITION:
NS
BAE SYSTEMS LAND & ARMAMENTS L.P.44114
NAVAL SEA SYSTEMS COMMAND53711
NAVAL SEA SYSTEMS COMMAND53711
CROSS-SECTIONAL SHAPE STYLE1 RECTANGULAR
HOLE DIAMETER10.3 MILLIMETERS MINIMUM AND 10.7 MILLIMETERS MAXIMUM
PERIPHERAL SHAPE STYLE1 ROUND
CENTER HOLE SHAPE STYLE1 ROUND
THICKNESS2.4 MILLIMETERS MINIMUM AND 2.6 MILLIMETERS MAXIMUM
OVERALL DIAMETER21.6 MILLIMETERS MINIMUM AND 22.4 MILLIMETERS MAXIMUM
MATERIALSTEEL COMP 1018 OVERALL OR STEEL COMP 1019 OR STEEL COMP 1020
MATERIAL DOCUMENT AND CLASSIFICATIONAISI ASSN STD ALL MATERIAL RESPONSES OVERALL
PROPRIETARY CHARACTERISTICSPACS
SURFACE TREATMENTPHOSPHATE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONDOD-P-16232,TY M,CL 2 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch ( .8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be . 6 inches ( .15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be . 16 inches ( .4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.