| CNH INDUSTRIAL AMERICA LLC | 10988 |
| THREAD CLASS | 3A 1ST END |
| THREAD CLASS | 3A 2ND END |
| CONNECTION STYLE | EXTERNAL SEAT FOR GASKET SEAL (BOSS) 2ND END |
| CONNECTION STYLE | FLARED (TUBE) 1ST END |
| LEG LENGTH | 1.700 INCHES NOMINAL 2ND END |
| LEG LENGTH | 1.210 INCHES NOMINAL 1ST END |
| CONNECTION TYPE | THREADED EXTERNAL BOSS 2ND END |
| CONNECTION TYPE | THREADED EXTERNAL TUBE 1ST END |
| NOMINAL THREAD SIZE | 0.875 INCHES 2ND END |
| NOMINAL THREAD SIZE | 0.500 INCHES 1ST END |
| SEAT ANGLE | 37.0 DEGREES 1ST END |
| FLOW ANGLE | 90.0 DEGREES |
| NOMINAL OUTSIDE DIAMETER TUBE ACCOMMODATED | 0.312 INCHES 1ST END |
| MATERIAL | STEEL OVERALL |
| THREAD SERIES DESIGNATOR | UNF 2ND END |
| THREAD SERIES DESIGNATOR | UNF 1ST END |
| NONDEFINITIVE SPEC/STD DATA | 3B FIGURE |
| A fitting that forms an angle of less that 18 degrees (3.141 radians) from a straight flow. One connecting end has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube or is unthreaded and designed to accommodate a tube. The other end has external or internal machine threads (straight threads other than pipe or hose series) and is designed to facilitate a gasket, preformed packing, washer, or the like, to form a seal at the boss. It may have side or heel inlet(s). It is designed to connect a tube or tube fitting to a boss or boss fitting on items such as tanks, housings, valve fittings, or the like. |
218
$0.00