Part Number: 2203-N104

(No reviews yet) Write a Review
CONDITION:
NS
NEW HAVEN MFG CORP AMATOM ELECTRONIC HARDWARE DIV6540
BAE SYSTEMS INFORMATION AND ELECTRONIC SYSTEMS INTEGRATION INC.19397
NORTHROP GRUMMAN SYSTEMS CORPORATION26512
NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC NOT FOR RFQ OR SOLICITATION USE80205
CROSS-SECTIONAL SHAPE STYLERECTANGULAR
HOLE DIAMETER0.100 INCHES MINIMUM AND 0.110 INCHES MAXIMUM
PERIPHERAL SHAPE STYLEROUND
CENTER HOLE SHAPE STYLEROUND
THICKNESS0.021 INCHES MINIMUM AND 0.041 INCHES MAXIMUM
OVERALL DIAMETER0.245 INCHES MINIMUM AND 0.270 INCHES MAXIMUM
MATERIALPLASTIC POLYAMIDE OVERALL
MATERIAL DOCUMENT AND CLASSIFICATIONMIL-P-17091,TYPE 1,COMP A-CANCELED MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
CROSS-SECTIONAL SHAPE STYLERECTANGULAR
HOLE DIAMETER0.100 INCHES MINIMUM AND 0.110 INCHES MAXIMUM
PERIPHERAL SHAPE STYLEROUND
CENTER HOLE SHAPE STYLEROUND
THICKNESS0.021 INCHES MINIMUM AND 0.041 INCHES MAXIMUM
OVERALL DIAMETER0.245 INCHES MINIMUM AND 0.270 INCHES MAXIMUM
MATERIALPLASTIC POLYAMIDE OVERALL
MATERIAL DOCUMENT AND CLASSIFICATIONMIL-P-17091,TYPE 1,COMP A-CANCELED MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch ( .8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be . 6 inches ( .15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be . 16 inches ( .4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.