Part Number: 27FH-820

(No reviews yet) Write a Review
CONDITION:
NS
SPS TECHNOLOGIES, LLC56878
NAVAL AIR WARFARE CENTER AIRCRAFT DIVISION CODE 4.8.8.0.0.B BLDG 148-280020
ZF INDUSTRIEANTRIEBE WITTEN GMBHD9182
E.C.A ETABLISSEMENT CENTRALD'APPROVISIONNEMENT DES FORCES ARMEESCY13
FITZ AEROSPACE, LLC019L2
HARVARD INDUSTRIES INC72962
FITZ AEROSPACE, LLC019L2
HARVARD INDUSTRIES INC72962
ARCONIC GLOBAL FASTENERS & RINGS, INC.15653
ARCONIC GLOBAL FASTENERS & RINGS, INC.75237
SATAIR A/SR1120
NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC NOT FOR RFQ OR SOLICITATION USE80205
MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M96906
NORTHROP GRUMMAN SYSTEMS CORPORATION26512
LAMSON AND SESSIONS CO THE75497
THREAD CLASS3B
THREAD DIRECTIONRIGHT-HAND
LOCKING FEATUREPREVAILING TORQUE ALL METAL DESIGN
LUBRICATIONSOLUBLE LUBRICANT
NUT STYLEHEXAGON
NUT HEIGHT0.575 INCHES MINIMUM AND 0.610 INCHES MAXIMUM
WIDTH ACROSS FLATS0.741 INCHES MINIMUM AND 0.752 INCHES MAXIMUM
TEMP RATING450.0 DEG FAHRENHEIT MAXIMUM
THREAD SERIESUNJF
THREAD QUANTITY PER INCH20
NOMINAL THREAD SIZE0.500 INCHES
COUNTERSINK ANGLE88.0 DEGREES MINIMUM NUT
BEARING SURFACE TYPECHAMFERED
BEARING SURFACE FINISH125.0 MICROINCHES
MATERIALSTEEL OVERALL
SURFACE TREATMENTCADMIUM OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-P-416,TYPE 2,CLASS 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
NONDEFINITIVE SPEC/STD DATA3 TYPE AND 15 STYLE
THREAD CLASS3B
THREAD DIRECTIONRIGHT-HAND
LOCKING FEATUREPREVAILING TORQUE ALL METAL DESIGN
LUBRICATIONSOLUBLE LUBRICANT
NUT STYLEHEXAGON
NUT HEIGHT0.575 INCHES MINIMUM AND 0.610 INCHES MAXIMUM
WIDTH ACROSS FLATS0.741 INCHES MINIMUM AND 0.752 INCHES MAXIMUM
TEMP RATING450.0 DEG FAHRENHEIT MAXIMUM
THREAD SERIESUNJF
THREAD QUANTITY PER INCH20
NOMINAL THREAD SIZE0.500 INCHES
COUNTERSINK ANGLE88.0 DEGREES MINIMUM NUT
BEARING SURFACE TYPECHAMFERED
BEARING SURFACE FINISH125.0 MICROINCHES
MATERIALSTEEL OVERALL
SURFACE TREATMENTCADMIUM OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-P-416,TYPE 2,CLASS 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
NONDEFINITIVE SPEC/STD DATA3 TYPE AND 15 STYLE
A nut having a flat bottom and 6 sides. An integral feature is incorporated for locking on the threads of a mating member. Excludes NUT (1), SELF-LOCKING, CAP.