Part Number: 3329W-1-101

(No reviews yet) Write a Review
CONDITION:
NS
BOURNS INSTRUMENTS INC80294
INTERLINK COMMUNICATIONS INC30890
NIMIKKEISTOKESKUS NCB FINLANDA486G
RAYTHEON COMPANY5869
SECTION QUANTITY1
BODY STYLERECTANGULAR BUSHING MOUNTED
RELIABILITY INDICATORNOT ESTABLISHED
TERMINAL LENGTH0.374 INCHES MAXIMUM
SHAFT DIAMETER0.110 INCHES NOMINAL
SHAFT LENGTH0.015 INCHES MAXIMUM
MOUNTING BUSHING LENGTH0.085 INCHES MAXIMUM
BODY LENGTH0.260 INCHES MAXIMUM
BODY WIDTH0.300 INCHES MAXIMUM
BODY HEIGHT0.385 INCHES MAXIMUM
SHAFT STYLEROUND, SLOTTED
SHAFT BEARING TYPESLEEVE
ACTUATOR TYPESINGLE SHAFT
EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION240.0 NOMINAL
MAXIMUM STARTING TORQUE5.00 INCH-OUNCES
MAXIMUM RUNNING TORQUE5.00 INCH-OUNCES
CENTER TO CENTER DISTANCE BETWEEN TERMINALS0.200 INCHES NOMINAL
TERMINAL LOCATIONLOWER ADJACENT SIDE TWO ROWS
MOUNTING METHODSNAP-IN AND TERMINAL
CENTER TO CENTER DISTANCE BETWEEN TERMINAL ROWS0.100 INCHES NOMINAL
ELECTRICAL RESISTANCE PER SECTION100.0 OHMS SINGLE SECTION
ROTARY ACTUATOR TRAVEL IN ANGULAR DEG260.0 NOMINAL
CENTER TO CENTER DISTANCE BETWEEN CENTER TERMINAL AND OUTSIDE TERMINAL0.100 INCHES NOMINAL
AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER150.0 SINGLE SECTION
TEMP COEFFICIENT OF RESISTANCE PER SECTION IN PPM PER DEG CELSIUS-100.0 TO 100.0 SINGLE SECTION
POWER DISSIPATION RATING PER SECTION IN WATTS0.5 FREE AIR SINGLE SECTION
RESISTANCE TOLERANCE PER SECTION IN PERCENT-20.0 TO 20.0 SINGLE SECTION
ACTUATOR TRAVEL CONTROL FEATURESTOPS
AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER85.0 SINGLE SECTION
TERMINAL TYPE AND QUANTITY3 PIN
TEST DATA DOCUMENT81349-MILR55182 SPECIFICATION
A resistor in which a sliding or rolling contact moves over an exposed area of the resistive element to change the ohmic value of the output. The functional tolerance (linearity), if given, of the output is greater than plus or minus 1 percent on linear outputs. Specified outputs such as sine, cosine, tangent, etc., shall be considered to be precision. For items having manually positioned taps designed to be set and fixed prior to use, see RESISTOR, ADJUSTABLE. For items with step by step variation, see RHEOSTAT and RESISTOR, STEP BY STEP. For tandem-mounted items designed to function together as an attenuator (and rated accordingly), see ATTENUATOR, VARIABLE. Excludes RESISTOR (1), VARIABLE, WIRE WOUND, NONPRECISION; RESISTOR (1), VARIABLE, NONWIRE WOUND PRECISION; and RESISTOR (1), VARIABLE, WIRE WOUND, PRECISION.