| ROCKWELL COLLINS, INC. | 13499 |
| ROCKWELL COLLINS, INC. | 13499 |
| OSHKOSH CORPORATION | 45152 |
| LOCKHEED MARTIN CORPORATION | 2769 |
| LOCKHEED MARTIN CORPORATION | 56232 |
| NUMAX ELECTRONICS INC | 53397 |
| ITW SHAKEPROOF AUTOMOTIVE PRODUCTS | 78189 |
| MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M | 96906 |
| HOLE DIAMETER | 0.320 INCHES MINIMUM AND 0.332 INCHES MAXIMUM |
| OUTSIDE DIAMETER | 0.588 INCHES MINIMUM AND 0.610 INCHES MAXIMUM |
| MATERIAL THICKNESS | 0.028 INCHES MINIMUM AND 0.034 INCHES MAXIMUM |
| END ITEM IDENTIFICATION | W/S: LOW ATITUTE NAVIGATION & TARGETING INFRARED SYSTEM (LANTIRN); ARMORED SECURITY VEHICLE, MODEL XM1117; CONCOLIDATED AUTOMATED SUPPORT SYSTEM (CASS); SUPPORT EQUIPMENT, MX PEACEKEEPER MISSILE; INFANTRY CARRIER; AIRCRAFT, (AC-130H, MC-130H, EC-130E, HC-130); TELETYPE, MODEL 28; COMMUNICATIONS TERMINAL; ENGINE, AIRCRAFT, F100-PW-100 (F-15A/B/C/D); SPRUANCE CLASS DD (963) |
| HARDNESS RATING | 40.0 ROCKWELL C MINIMUM AND 50.0 ROCKWELL C MAXIMUM |
| MATERIAL | STEEL COMP 410 OVERALL |
| MATERIAL DOCUMENT AND CLASSIFICATION | 66 FED STD SINGLE MATERIAL RESPONSE OVERALL |
| SURFACE TREATMENT | PASSIVATE OVERALL |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-35,TY 2 OR TY 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL |
| STYLE DESIGNATOR | FLAT EXTERNAL TEETH |
| A washer which is usually round with a centrally located hole. Its edges and two bearing surfaces are so designed that applied pressure brings into play the spring tension and/or frictional locking principle which materially resists any tendency toward turning. It may be made of one or two pieces |
373-0080-00
$0.00