Part Number: 40-619-1225

(No reviews yet) Write a Review
CONDITION:
NS
MEGGITT (NEW HAMPSHIRE), INC58880
MOUNTING HOLE TYPECOUNTERSUNK AND THREADED
SECOND LEG WIDTH0.200 INCHES NOMINAL
FIRST LEG HOLE DIAMETER0.073 INCHES NOMINAL
SECOND LEG HOLE DIAMETER0.096 INCHES NOMINAL
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH0.110 INCHES NOMINAL
FIRST LEG THICKNESS0.062 INCHES NOMINAL
SECOND LEG THICKNESS0.062 INCHES NOMINAL
CENTER SECTION HEIGHT0.320 INCHES NOMINAL
CENTER SECTION WIDTH0.200 INCHES NOMINAL
CENTER SECTION THICKNESS0.062 INCHES NOMINAL
FIRST LEG STYLE104
FIRST LEG WIDTH0.200 INCHES NOMINAL
SECOND LEG STYLE104
FIRST LEG HOLE ARRANGEMENT STYLE132
SECOND LEG HOLE ARRANGEMENT STYLE132
SECOND LEG RELATIONSHIP TO FIRST LEGNOT IDENTICAL
SPECIAL FEATURESENDS ARE CHAMFERED 0.040 IN. 45 DEG
MATERIALALUMINUM ALLOY 5052
MATERIAL DOCUMENT AND CLASSIFICATIONQQ-A-250/8 H32 FED SPEC SINGLE MATERIAL RESPONSE
PROPRIETARY CHARACTERISTICSPACS
SURFACE TREATMENTCHROMATE
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONMIL-C-5541 MIL SPEC SINGLE TREATMENT RESPONSE
STYLE DESIGNATOR11 DOUBLE ANGLE
A rigid item usually fabricated from flat material, forming two alternate or two adjacent interior angles, both which are less than 18 degrees (3.141 radians). It is designed to position, align, and/or support an item. It may be reinforced. See also BRACKET, ANGLE and BRACKET (1), MOUNTING.